Page 1
MC132EMG\MC192EMG 1/31/03 10:41 AM ’ WNER ANUAL MC132EMG/MC192EMG COLOR TV WITH BUILT-IN VCR AGNAVOX REPRESENTATIVES ARE READY TO HELP YOU WITH ANY QUESTIONS ABOUT YOUR NEW PRODUCT E WANT YOU TO START ENJOYING YOUR NEW PRODUCT RIGHT AWAY ALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT...
MC132EMG\MC192EMG 1/31/03 10:41 AM Return your Warranty Registration card today to ensure you receive all the benefits you’re entitled to. Once your MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of own- ing a MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once.
10:41 AM Welcome to your TV/VCR owner’s manual. This manual describes the MC132EMG and MC192EMG. These two models are dif- ferent sizes, but they operate identically. The MC132EMG is illustrated in this manual. Features • Automatic Channel Setup • Automatic Head Cleaner •...
To record again on the same tape, cover the hole with cellophane tape. Using the Remote Control Point the remote control at the front of the TV/VCR. Do not put objects between the remote control and the TV/VCR. TV/VCR Maintenance...
MC132EMG\MC192EMG 1/31/03 10:41 AM 6 Hooking Up the TV/VCR Hook up your TV/VCR using one of the connections shown. Hooking Up Your TV/VCR With a Cable TV Signal or Outdoor Antenna Hooking Up Your TV/VCR With a Cable Box/Satellite Receiver...
• Before connecting an antenna or Cable TV signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is bent, straighten it as illustrated, then connect the antenna or Cable TV signal to the ANT(enna) Jack.
The TV/VCR can memorize the channels you receive in your area. If you are using a Cable Box or Satellite Receiver, you do not need to set channels at the TV/VCR. Set the TV/VCR to the output channel of the Cable Box or Satellite Receiver (channel 03 or 04).
MC132EMG\MC192EMG 1/31/03 10:41 AM Follow the steps below to play a tape. Insert a tape in the TV/VCR’s cassette com- partment. The power will come on. If the tape’s record tab is missing, playback should start automati- cally. If playback does not start automatically, press PLAY/ to start playback.
Follow the steps below to record a current TV program. Place a tape with its record tab intact (see page five) in the TV/VCR. The power will come on. Or, if the tape is already in the TV/VCR, press POWER to turn on the TV/VCR if necessary.
MC132EMG\MC192EMG 1/31/03 10:41 AM PLAY/ Button Press to play a tape. Details are on page nine. Press to select a menu item. Press to enter numbers when setting a timer recording or the clock. POWER Button Press to turn on or off the TV/VCR.
Press once to start a recording. Details are on page 10. Press repeatedly to start a One-Touch Recording (an immediate timed recording, 30 minutes to eight hours long) of the current TV chan- nel. Details are on page 27. Page 12...
MC132EMG\MC192EMG 1/31/03 10:41 AM AC Power Cord Connect to a standard AC outlet to supply power to the TV/VCR. Page 13 Rear Panel 13 ANT(enna) Jack Connect your antenna or Cable TV signal here. Details are on page six. Antenna Hole Connect the stem of an indoor rod antenna here.
MC132EMG\MC192EMG 1/31/03 10:41 AM 14 Menu Language, Resetting TV Channels Menu Language This affects the language of the TV/VCR’s menu, not TV pro- gramming, videotapes, or closed captioning. Press MENU. Press PLAY/ select LANGUAGE. – M E N U –...
MC132EMG\MC192EMG 1/31/03 10:41 AM The channels you no longer receive or seldom watch can be deleted from the memory. (Or, you can add new channels into the memory without having to reset all the channels.) Press MENU. Press PLAY/ select CHANNEL SET UP. Press F.FWD/B.
Auto Clock Setting below. If not, follow Manual Clock Setting on pages 18-19. Auto Clock Setting You can have the TV/VCR set the clock automatically by using the PBS channel in your area. Once you have set the clock, the TV/VCR will automatically monitor the correct time and date being broadcast by the PBS station and con- tinuously update the time accordingly.
MC132EMG\MC192EMG 1/31/03 10:41 AM The TV/VCR will scan all your available TV channels. Those that carry a time signal will be listed at the top of the screen. Use one of these channels when you enter your AUTO CLOCK CH at step 6. It will take the TV/VCR several minutes to scan the channels.
MC132EMG\MC192EMG 1/31/03 10:41 AM 18 Setting the Clock (cont’d) Manual Clock Setting Press MENU. Press PLAY/ select SETTING CLOCK. Then, press F.FWD/B. – M E N U – TIMER PROGRAMMING PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP USER’S SET UP...
Press MENU. Although seconds are not displayed, they begin counting from zero when you press MENU. Use this feature to synchronize the clock exactly. To see the current time on the TV screen, press DISPLAY. Details are on page 21. 5:40 PM Page 19 Setting the Clock (cont’d) 19...
MC132EMG\MC192EMG 1/31/03 10:41 AM 20 Daylight-Savings Time When Daylight-Savings Time (D.S.T.) is ON, the TV/VCR clock will automatically move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. To turn Daylight-Savings Time ON or OFF, follow the steps below.
MC132EMG\MC192EMG 1/31/03 10:41 AM Picture Control Follow these steps to adjust the TV/VCR’s brightness, color, tint, sharpness, and contrast. Press MENU. Press PLAY/ select PICTURE CONTROL. Press F.FWD/B. – M E N U – TIMER PROGRAMMING B PICTURE CONTROL SETTING CLOCK CHANNEL SET UP USER’S SET UP...
The current date will be flashing in the DATE space. For a one-time recording, press PLAY/ you want to record. Or, to record a TV program at the same time on the same channel every day, press STOP/ appears. Or, to record a TV program at the same time on the...
Page 23
Press POWER to turn off the TV/VCR and set the timer recording. The red Record light will appear. You must turn off the TV/VCR for a timer recording. If the power is on, TIMER REC STANDBY flashes on the screen two minutes before the recording is scheduled to begin.
Press MENU to remove the menu. Cancelling Timer Recordings To cancel a timer recording that is in progress: Press POWER to turn on the TV/VCR, then press STOP/EJECT on the front of the TV/VCR. To cancel a timer recording that has not started: With the TV/VCR power on, press MENU.
MC132EMG\MC192EMG 1/31/03 10:41 AM Turning on AUTO RETURN sets the TV/VCR to rewind the tape automatically to the beginning of a timer recording. Press MENU. Press PLAY/ select USER’S SET UP. Then, press F.FWD/B. – M E N U –...
Point the TV/VCR remote control at the TV/VCR. Press Number buttons 0, 0 so that AUX appears on the screen. The TV/VCR is now in Line Input or Auxiliary mode. Point the TV/VCR remote control at the TV/VCR. Press SPEED until the desired tape speed (SP or SLP) appears on the screen.
This function cannot be done from the remote control. Recording starts immediately when you press REC/OTR. Before you begin, make sure ... The TV/VCR power is on and has a videotape with a record tab. If necessary, rewind or fast forward the tape to the point at which you want to begin recording.
High Speed Searching (LP/SLP) During tape playback, press F.FWD/B or REW(ind)/{, then press again. The TV/VCR will search the tape in high speed. Press F.FWD/B or REW(ind)/{ repeatedly to switch between regular and high speed searching. To return to normal playback, press PLAY/ .
MC132EMG\MC192EMG 1/31/03 10:41 AM Repeat Play allows you to repeat a tape repeatedly. Press MENU. Press PLAY/ select USER’S SET UP. Then, press F.FWD/B. – M E N U – TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP B USER’S SET UP...
MC132EMG\MC192EMG 1/31/03 10:41 AM 30 Rental Playback This function improves picture quality of worn videotapes. Press MENU. Press PLAY/ select USER’S SET UP. Then, press F.FWD/B. – M E N U – TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP B USER’S SET UP...
Time Search Time Search lets you rewind or fast forward a tape to a posi- tion by entering the amount of playback time you want to skip. When a tape is in the TV/VCR, press TIME SEARCH. Press PLAY/ or STOP/ time appears (for example, 2:50 for 2 hours, 50 min- utes).
In this case, the mes- sage PROTECTED PROGRAM by ... appears on the TV screen. The viewer must select a different TV channel or watch a videotape instead. V-CHIP also blocks viewing of tapes that you record on this TV/VCR, if the recorded TV program’s rating exceeds your...
Page 33
TV-14 ( [VIEW] TV-MA( [VIEW] If you select TV-Y7, TV-PG, TV-14, or TV-MA, then press F.FWD/B to select BLOCK, the selected cate- gory’s subratings will appear. Each subrating may be set to BLOCK or VIEW. To set the subratings indi-...
Page 34
MC132EMG\MC192EMG 1/31/03 10:41 AM 34 Setting V-Chip (cont’d) MPAA Rating Settings Press MENU. Press PLAY/ select V-CHIP SET UP. Then, press F.FWD/B. – M E N U – TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP USER’S SET UP...
MC132EMG\MC192EMG 1/31/03 10:41 AM Follow the steps below to select closed captions for TV pro- gramming. Not all TV programs and commercials have closed captions or all types of closed captions (second language, half-screen text, etc.). If closed captioning is not broadcast, you cannot receive it.
Set the clock. Details are on pages 16-19. If the clock is not set, you cannot set the Wake Up Timer. Put a tape in the TV/VCR if you want the TV/VCR to start tape playback at the specified time.
MC132EMG\MC192EMG 1/31/03 10:41 AM Use the Sleep Timer to program the TV/VCR to shut itself off in a certain amount of time. Press SLEEP/WAKE UP until SLEEP TIMER appears. Press PLAY/ , STOP/ , F.FWD/B or REW/s until your desired sleep time appears.
38 Automatic Operation Features Automatic Playback When you put a tape in the TV/VCR, the power will come on automatically. If the tape’s record tab is missing, playback will begin. If a timer recording is set, the power will not come on automatically when you insert a tape with the record tab intact.
MC132EMG\MC192EMG 1/31/03 10:41 AM AUDIO In Jack: jack on the front of the TV/VCR that receives audio from other equipment. Automatic Channel Setup: process in which the TV/VCR memorizes all available channels. Then, when you push the CH(annel) scan through channels you receive.
• Moisture may condense inside the unit when you move it from a cold place to a warm place, after heating a cold room, or when the humidity is high. There is no warning that moisture is in your TV/VCR. Playing a tape in a TV/VCR in which moisture has accumulated could damage the tape and the TV/VCR.
TV/VCR power shuts off after 15 minutes. • The TV/VCR will shut itself off after 15 minutes when it is on a channel that is not receiving a broadcast sig- nal (for example, a station that has gone off the air for the night). This is normal.
MC132EMG\MC192EMG 1/31/03 10:41 AM 42 Specifications General CRT: 13-inch in line gun (MC132EMG) 19-inch in line gun (MC192EMG) Television system: NTSC Closed caption system: Section 15.119, FCC (Federal Communications Commission) Standard Video Heads: Two heads Tape width: 1/2 inch (12.65 mm) Tape speed SP: 33.35 mm/sec.
MC132EMG\MC192EMG 1/31/03 10:41 AM WHO IS COVERED? You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. WHAT IS COVERED? Warranty coverage begins the day you buy your product.
Need help?
Do you have a question about the MC132EMG and is the answer not in the manual?
Questions and answers