Magnavox MC132EMG Quick Use Manual

Quick-Use Guide
There are different ways to connect your TV/VCR to receive TV channels.This Quick-Use
Guide shows the easiest Antenna or Cable TV signal connection. Other hookups, including
those with a Cable Box or Satellite Receiver, are explained in the owner's manual.
Connections
1
Connect an antenna or a Cable TV signal
to the ANT(enna) jack on the rear of the
TV/VCR.
2
Plug in the TV/VCR's power cord.
3
Press POWER to turn on the TV/VCR.

Setting Up TV Channels

You will be using the remote control. Make sure you
have batteries in it.
1
Press MENU.
2
Press PLAY/o or STOP/p to select
CHANNEL SET UP. Press F.FWD/B.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
B CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
3
Press PLAY/o or STOP/p to select
AUTO CH PROGRAMMING.
Press F.FWD/B to start saving TV channels.
When complete, the TV/VCR will go to the
lowest available channel. Use CH o/p to
select other channels.
– CHANNEL SET UP –
ADD / DELETE CH (CATV)
B AUTO CH PROGRAMMING
Antenna or
Cable TV signal
ANT.
POWER SLEEP/WAKE UP
PLAY
REW F.FWD
STOP
1
DISPLAY
1 2 3
4 5 6
7 8 9
+ 100
0
SPEED RESET PAUSE/STILL
MUTE
RECORD TIME SEARCH
ANT.
2-3
CH.
VOL.