Advertisement
Choose a pair of ear tips that best fit your ears.
Adjust the earphones to a comfortable and secure position.
Press and hold the button for 2-4s to power your earphones on. Press and hold the button for over 4s to power your earphones off.
Power off the earphones, then press and hold the button for 10s until the indicator turns steady red. Bluetooth pairing information will also be cleared.
The textured surface of the earphones has been anodized for insulation and covered with a protective insulation film. Do not remove the film.
After entering Pairing mode, the earphones will automatically power off if no connection is made within 3 min.
When you power on the earphones, they will automatically reconnect to the last phone they were connected to.
After the earphones disconnect from your phone:
If you return back within the Bluetooth range in under 10 min, the connection will automatically resume. If you return back within 10-30 min, the connection can be manually reconnected. If you do not return back within 30 min, the earphones will automatically power off.
Due to differences in Bluetooth technologies, some phone models do not support automatic reconnection. This does not indicate an issue with your earphones.
Press the button to end it, or press and hold the button for 2-4s to switch between the phone and the earphones.
Press the button to end the ongoing call and answer the new call. Press the button twice to put the ongoing call on hold and answer the new call.
Press and hold the button for 2-4s until you hear a prompt tone to continue the ongoing call and reject the new call.
Operations may vary slightly depending on the phone brand and specifications. If you have any questions, contact Huawei after-sales personnel for assistance.
Press the button twice to remake the last outgoing call. Press the button again to cancel the call.
Press the button to pause the music and answer the call. Press the button again to end the call and resume music playback.
Ensure that the earphones and your phone are within range and there are no obstacles between them. Otherwise, call or music quality may be compromised and Bluetooth may even disconnect.
Press the button to play/pause during music playback. Press and hold the +/- button for over 2s to switch songs.
During charging, the indicator will be steady red. After the earphones are fully charged, the indicator will be steady blue.
Note
Before using and operating this device, read the following precautions to ensure optimal device performance and avoid dangers or unauthorized operations.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the AM61 and is the answer not in the manual?
Questions and answers