Phanteks Evolv X2, PH-ES524XTG DMW01, PH-ES524XTG DBK01 Manual

INTRODUCTION

LEGEND

Remove

Install

Loosen

Phanteks will not take responsibility for any damages incurred due to incorrect installation or usage of this product.

SPECIFICATIONS

CASE SPECIFICATIONS

PCI SLOTS & DRIVE BAYS

FAN

RADIATOR

CLEARANCE

SCOPE OF DELIVERY

ACCESSORY BOX

ASSORTMENT BOX

DIMENSIONS

I/O LAYOUT

REMOVING EXTERNAL PANELS

1. REMOVE TOP PANEL
   
2. REMOVE SIDE PANEL SCREWS
   
   PRO TIP: Secure the side panels when transporting the chassis.
3. REMOVE LEFT SIDE PANEL
   
4. REMOVE RIGHT SIDE PANEL
   

HARDWARE INSTALLATION

INSTALL ATX MAINBOARD

INSTALL MICRO-ATX

For Micro-ATX boards, please refer to the mainboard manual for the correct installation.

Use the included stand-off tool to easily take out the mainboard stand-offs.

Micro-ATX Stand-off locations

Stand-off Removal Tool

Mainboard Stand-off

REMOVE PCIe COVER

ACCESS REAR PANEL

INSTALL POWER SUPPLY

PRO TIP: Attach all PSU cables first before installing the PSU into the chassis.

FAN & RADIATOR SUPPORT

FANS

RADIATOR

1. INSTALL BOTTOM FANS
   
2. INSTALL REAR FAN
   
3. INSTALL TOP FANS & RADIATOR
   1. 
      
   2. 1. AIO TUBES REAR ORIENTATION
         
      2. AIO TUBES FRONT ORIENTATION
         

INSTALLING STORAGE

1. TRIPLE SSD BRACKET
   1. 
      
   2. 
      
2. STORAGE BRACKET
   1. 
      
   2. 
      
      1. TOP 3.5" HDD
         
      2. TOP DUAL 2.5" SSD
         
      3. TOP SINGLE 2.5" SSD
         
      4. BOTTOM 3.5" HDD
         

CABLE ROUTING

TOP I/O CABLE

SIDE I/O CABLES

PSU CABLE MANAGEMENT

STORAGE CABLE MANAGEMENT

INSTALLING GPU BRACKET

LOOSEN GPU BRACKET

ADJUST AND SECURE GPU BRACKET

DUST FILTERS

BOTTOM DUST FILTER

TOP DUST FILTER

RMA & Technical Support

INTERNATIONAL
E-mail: support@phanteks.com

AMERICAS
Hours Monday - Friday 09:00 - 05:00 PST
Phone Number: +1 (909) 598 2115

E-mail: support@phanteksusa.com

SAFETY INFORMATION

In order to achieve maximum safety, we suggest that you adopt the following guidelines:

1. Place the product on a clean and stable surface that allows adequate air ventilation.
2. Don't use or place the product and any of its components near water, moisture, or other wet surfaces; or place the product near any heat, open flame, or other hot surfaces such as radiators, stoves, fireplaces, and candles.
3. Use caution when operating the desktop PC to avoid electrical shock or damage, such as unplugging the power supply during thunderstorms, ensuring that your hands are dry before using (and handling) the desktop PC, keeping it away from any source of liquid and/or heat source, and using all other reasonable precautions needed under the circumstances.
4. When connecting external devices to your desktop PC, carefully plan how the wires will be placed. Protect any connected cables from being trod on or pinched, particularly at plugs, convenience receptacles, or the point where they exit from.
5. Take extra caution when handeling/removing/reattaching glass components. Once removed, place the glass component on a stable surface first before proceeding.
6. When unplugging any connected devices and/or cables, always pull the cable or device's plug or connector. Don't forcefully tug on its cord.
7. Don't place any heavy items on top of the product.
8. Make sure that the desktop PC is off, unplugged from the outlet, and that all connected devices are powered off and unplugged (if any) before installing or uninstalling any internal component to and/or from the dekstop PC or product.

For more information and product specifications, visit www.phanteks.com

Documents / Resources

References

• Phanteks

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Phanteks Evolv X2, PH-ES524XTG DMW01, PH-ES524XTG DBK01 Manual