Troubleshooting Guide - Kenwood TK 3230 - FreeTalk XLS UHF Instruction Manual

tROUBLeShOOting gUide

Problem
Cannot turn
the transceiver
power ON.
Battery power
dies shortly after
charging.
Cannot talk to
or hear other
members in your
group.
Other voices
(besides group
members) are
present on the
channel.
The transceiver
is malfunctioning
for no apparent
reason.
• The battery pack may be dead.
Recharge or replace the battery pack.
• The battery pack may not be installed
correctly. Remove the battery pack
and install it again.
• The battery pack life is finished.
Replace the battery pack with a new
one.
• Make sure you are using the same
frequency and QT/DQT setting as the
other group members.
• Other group members may be
using Privacy Talk. Turn on your
transceiver's Privacy Talk.
• Other group members may be too
far away. Make sure you are within
range of the other transceivers.
• Change the QT/DQT settings. Make
sure all group members change the
settings on their transceivers to match
the new QT/DQT setting.
• Reset the transceiver as described on
page 43
Solution