Troubleshooting Guide - Kenwood ProTalk LT PKT-23 Instruction Manual

Problem
Cannot turn the
transceiver power ON.
Battery power dies shortly
after charging.
Cannot talk to nor hear
other members in your
group.
Other voices (besides
group members') are
present on the channel.

TROUBLESHOOTING GUIDE

•
•
•
•
•
•
Solution
The battery pack may be dead.
Recharge or replace the battery
pack.
The battery pack may not be
installed correctly. Remove the
battery pack and install again.
The battery pack life is fi nished.
Replace the battery pack with a
new one.
Make sure you are using the
same frequency and QT/DQT
settings as the other members in
your group.
Other group members may be too
far away. Make sure you are within
range of the other transceivers.
Change the QT/DQT settings.
Make sure all group members
change the settings on their
transceivers to match the new QT/
DQT setting.
21