Resetting The Transceiver - Kenwood TK 3230 - FreeTalk XLS UHF Instruction Manual

ReSetting the tRanSceiVeR

At some point in time, you may desire to reset the transceiver
settings to their default values. (Default values are listed on
pages 45 ~ 46.)
To reset the transceiver:
 With the transceiver power OFF, press and hold the
and MON keys while turning the transceiver power ON.
• "rESt" (reset) will appear on the display.
 Release the
• The confirmation message "SUrE" (sure) will appear on the
display.
 Press the PTT switch to reset the transceiver.
• Press any other key to cancel the reset.
Note: Reset will function even if Super Lock has been activated.
, , and MON keys.
, ,