Troubleshooting Guide - Kenwood TK-3230DX Instruction Manual

Problem
Cannot turn the
transceiver power
ON.
Battery power
dies shortly after
charging.
Cannot talk to
or hear other
members in your
group.
Other voices
(besides group
members) are
present on the
channel.
You cannot make a
selcall.
You cannot receive
calls except
selcalls.
You cannot transmit
even by pressing
the PTT switch.
The transceiver
is malfunctioning
for no apparent
reason.

TROUBLESHOOTING GUIDE

• The battery pack may be dead. Recharge or
replace the battery pack.
• The battery pack may not be installed
correctly. Remove the battery pack and
install it again.
• The battery pack life is fi nished. Replace
the battery pack with a new one.
• Make sure you are using the same
frequency and QT/DQT setting as the other
group members.
• Other group members may be using Privacy
Talk. Turn on your transceiver's Privacy Talk.
• Other group members may be too far away.
Make sure you are within range of the other
transceivers.
• Change the QT/DQT settings. Make sure
all group members change the settings on
their transceivers to match the new QT/DQT
setting.
• Verify and set your transceiver ID (Own,
Group, All).
• Optional Signaling is set to "FS (FleetSync)".
Change the setting to "oF (OFF)".
• Reset the transceiver as described on page
46.
Solution
47