Troubleshooting Guide - Kenwood ProTalk LT PKT-23LF Instruction Manual

Problem
Cannot turn the transceiver
power ON.
Battery power dies shortly
after charging.
Cannot talk to nor hear
other members in your
group.
Other voices (besides
group members') are
present on the channel.

TRouBLEShooTInG GuIDE

•
•
•
•
•
•
Solution
The battery pack may be dead.
Recharge or replace the battery pack.
The battery pack may not be installed
correctly. Remove the battery pack
and install again.
The battery pack life is finished.
Replace the battery pack with a new
one.
Make sure you are using the same
frequency and QT/DQT settings as
the other members in your group.
Other group members may be too far
away. Make sure you are within range
of the other transceivers.
Change the QT/DQT settings. Make
sure all group members change
the settings on their transceivers to
match the new QT/DQT setting.
31