Kenwood TK 3230 - FreeTalk XLS UHF Instruction Manual page 23

• When you receive a call on your selected
channel, you will hear audio from the speaker
and the LED will light green.
• To use a signalling code, refer to "QUIET TALK/
DIGITAL QUIET TALK" on page 16.
r Make a Call.
 Press the MON key to make sure the
channel is not in use {page 19}.
 Press and release the CAL key to alert the
other parties that you are beginning a call.
• A calling alert tone will sound on the other
party's transceiver.
 Press and hold the PTT switch, then
speak into the microphone to transmit.
• The LED lights red while transmitting.
• For best sound quality, speak into the
microphone in your normal speaking
voice while holding the microphone
approximately 1.5 inches (3 to 4 cm) from
your lips.
 Release the PTT switch when you have
finished speaking.