Attery Ave - Kenwood TK 3230 - FreeTalk XLS UHF Instruction Manual

B S
Attery Ave
This transceiver has been designed to give you the most out of
your battery power. The battery save function decreases the
amount of power used when a signal is not being received and
no operations are being performed.
While using the transceiver, battery save will automatically
switch ON after 5 seconds have elapsed with no operations or
received calls. Operating the transceiver or receiving a call will
switch this feature OFF until 5 seconds of non-operation occurs
again.
To turn this function on or off:
 With the transceiver power OFF, press and hold the MENU
key while turning the transceiver power ON (for 1 second).
 Press the
 Press the MENU key then press
(battery save on) or "bS-oF" (battery save off).
 Press the MENU key to confirm the selection.
 Press the PTT, MON, or CAL key to exit Setting Mode.
8
or key to select "bS".
or to select "bS-on"