Display - Denon DN-S3700 Owner's Manual

Display

Q9 Q8 Q7
qw e r
q
Play position indicator
The position of playback is indicated by the
elapsed time, in blue when in the normal play
mode, in reversal display when in the reverse
play mode.
When the time to the end of the track (file) is
less than the specified time, the play position
indicator flashes according to the remaining
track time (EOM) to indicate the end of the track
(file).
w
Point indicators
These indicate the cue point, the hot start point,
the A and B points, the break point and the auto
loop point.
e
Character and Waveform display section
With the DN-S3700, mode selection and other
operations can be performed following the
PARAMETERS
character display and using the
knob.
The PARAMETERS indicator flashes when data
PARAMETERS
can be entered using the knob.
There are two modes for the character and
waveform display. The waveform data can be
created using the included DENON DJ Music
Manager.
1. Waveform display + character display:
• Characters are displayed below the waveform.
The character display section indicates the
operation, mode name, data, etc. ">>
indicated at the side of the displayed data.
When ">> " is flashing, this indicates that the
item at that row is selected.
Q6 Q5 Q4 Q3 Q2
ty u io Q0 Q1
b Waveform is not displayed when there is no
waveform data.
2. Mirror waveform display + point display
" is
Icons are used to indicate such information as the
cue point " " , hot start point 1 "
point 2 " " , hot start point 3 "
" " , auto loop " " below
waveform.
r
File data indicators
This indicates the file's format.
t
D-LINK connection confirmation indicator
This lights when D-LINK connection has been
confirmed.
y
Keyboard connection indicator
Deck for which keyboard is effective will be
displayed.
u
KEY ADJ. indicator
KEY ADJ. indicator appears in display when the
Key Adjust mode is ON.
i
MEMO indicator
This indicates whether or not there is memo
data.
When in the play or standby mode, the "MEMO"
indicator lights if there is memo data for the
current track. In the playlist search mode in
the USB mode, the indicator flashes if there is
memo data for the selected playlist.
In the CD mode when D-LINK is possible, the
"MEMO" indicator flashes if data is stored in
the USB memory connected to the other DN-
S3700.
o
Visual marker
This turns according to the playing status of the
different decks.
Use this as an indicator for scratching and other
JOG operations.
Q0
Loop mode indicators
DN-S3700 has Loop mode indicators which
consist of A , B and two arrows.
A and B marks indicate A and B points have been
set.
Two arrows indicate loop setting mode as
follows.
or Left arrow only on:
Hot Start mode
Both arrows on:
Seamless Loop mode
, Both arrows flashing:
Seamless Loop Playing
, Left arrow on, right flashing:
Exit play from Seamless Loop
" , hot start
" , A/B loop
the mirror
Q1
WFM indicator
This lights when there is waveform data in the
ID3 tag of the file on the USB device.
Q2
PITCH, BPM display
This indicator display the playback speed (pitch)
or BMP .
Q3
BPM indicator
Lights when the BPM is displayed on the pitch
display.
Q4
PITCH indicator
This lights when the pitch is displayed on the
pitch section of the display.
Q5
Play mode indicators
When "SINGLE" indicator lights up, playback
will finish at end of current file.
When "CONT. " indicator lights up, playback
continues.
Q6
Minute, second and frame displays
These displays indicate current position
information.
Q7
Time mode indicators
TIME
When the button is pushed, the Time
mode indicator switches as follows.
ELAPSED: File's elapsed time is displayed.
REMAIN: File's remaining time
displayed.
T. ELAPSED: The total elapsed time of Playlist
is displayed.
T. REMAIN: The total remaining time of
Playlist is displayed.
Q8
Track indicator
The number of the currently playing track is
displayed here when in the playlist or CD mode.
Q9
SOURCE displays
This displays the device currently selected for
the different decks.
is