Front Panel; Rear Panel - Denon DN-S3700 Owner's Manual

Front Panel

q
Disc loading slot
Insert CDs here. Insert the CD slowly, then
release it.
q

Rear Panel

q w e r t
q
Fader start terminal
• Connect this terminal to a compatible mixer.
The various fader commands (play, pause, cue,
etc.) are received from the mixer.
• Use a 3.5 mm stereo mini cord for connection.
w
Analog output terminals (LINE OUT)
• This is unbalanced RCA output terminals.
• Audio signals outputs.
e
Digital output terminal (DIGITAL OUT)
• Digital data is available from these terminals.
• Use 75 Ω/ohms pin cord for connection.
• We recommend you use braided wire type
shielded cable.
NOTE
The playback level after analog conversion is set
to –6 dB below the usual level to avoid digital
distortion.
r
PS/2 connector
Terminal for connecting a PS/2 keyboard.
t
D-LINK connector
Terminal for connecting another DN-S3700.
Exchange of memo data, keyboard data and
relay command information is performed with
another DN-S3700.
b Do not connect anything other than a DN-
S3700.
b Use an RJ45 cross cable no longer than 3
meters for connection.
y u i
y
USB B port
• USB MIDI and HID commands are sent from the
DN-S3700 to the computer.
• USB MIDI and HID commands as well as USB
AUDIO signals are received from the computer.
u
USB A port
Only one mass storage device (USB memory,
USB HDD, etc.) can be connected.
b Not compatible with USB hubs
i
POWER ON/OFF button
Push this button to turn power on and off.
NOTE
Do not turn off the power while a disc is loading or
ejecting. Doing so could damage the CD mechanism
and lead to malfunction.