Canon i-SENSYS MF461dw User Manual page 61

2
On the [Current Date/Time Settings] screen, enter the date and time, and press
[Apply].
➠
The time and date are set, and the Remote UI confirmation screen is displayed.
Step 3: Setting Remote UI
With Remote UI, you can use a Web browser on a computer to check the operation status of the machine, change the
settings, and perform other operations.
Set the Remote UI Access PIN to prevent unauthorized access to the machine.
1
On the Remote UI confirmation screen, press [Yes].
To set the Remote UI Access PIN at a later time, press [No] and proceed to "Step 4: Connecting to a Wireless
LAN ." Step 4: Connecting to a Wireless LAN(P. 51)
2
On the [Configure General User Mode] screen, press [Yes].
Restrict the use of Remote UI to only those users who know the Remote UI Access PIN.
3
Enter the Remote UI Access PIN, and press [Apply].
Specify any number. You cannot set a PIN consisting of all zeros, such as "00" or "0000000."
4
Enter the PIN again, and press [Apply].
➠
After the message [Settings configured.] appears, the screen for confirming the wireless LAN connection is
displayed.
Step 4: Connecting to a Wireless LAN
Connect to the network using wireless local area network (LAN).
1
On the screen for confirming the wireless LAN connection, press [Yes].
● If the machine is not connected to a wireless LAN, press [No], and proceed to "Step 5: Viewing an Overview of
the Application Library and Setup Method."
Setup Method(P. 52)
● When connecting to a wired LAN, configure the wired LAN connection settings after exiting the Setup Guide.
Selecting Wired or Wireless LAN(P. 55)
2
Select the Wireless LAN connection type, and connect to the Wireless LAN.
➠
When the connection to the wireless LAN is completed, the [Application Library] screen is displayed.
Depending on your wireless LAN router, the connection type and security standards may vary. Check for a
connection type and security standard that are supported by both the wireless LAN router and the machine,
and then establish a connection according to the connection type. For the standards and procedure, see the
following:
Connecting to a Wireless LAN(P. 57)
Setting Up
Step 5: Viewing an Overview of the Application Library and
51