Tools Needed; Blades - Craftsman 21805 - 10 in. Table Saw Operator's Manual

BLADES
For maximum performance, it is recommended that you
use the Craftsman 36-tooth, 10 in. carbide ¢ombination
blade provided with your saw. Additional blade styles of
the same high quality are available for specific operations
such as ripping. Your local dealer can provide yeu with
complete information.
_lk WARNING: Do not use blades rated less than the
speed of this tool. Failure to heed this warning could
result in personal injury.
The following tools (not included) are needed for making adjustments:
COMBINATION
SQUARE
1/2 in. WRENCH
Fig. 4
13