Unpacking And Checking - Craftsman 21602 - 16 in. Variable Speed Scroll Saw Operator's Manual

UNPACKING AND CHECKING
CONTENTS
,A WARNING I
To avoid injury, if any part is
missing or damaged, do not plug
the scroll saw in until the missing
or damaged part is replaced, and
assembly is complete.
To avoid fire and toxic reaction,
never use gasoline, naphtha,
acetone, lacquer, thinner or
similar highly volatile solvents to
clean the scroll saw.
1. Remove the scroll saw from the
carton by lifting the saw by the back
of the upper frame.
2. Place the saw on a secure
stationary work surface.
3. Separate all parts from the packing
material. Check each one with the
illustration below to make certain
all items are accounted for before
discarding any packing material.
CAUTION: Do not lift this saw by the
arm that holds the blade, this may
result in damage to the tool.
Scroll Saw
Pin-end saw blade Plain-end
saw blades
Dust port 3 mm T-wrench
adapter