Craftsman 21239 - 12 in. Sliding Compound Miter Saw Operator's Manual page 5

1 &CHECK FOR DAMAGED PARTS. Before
further use ofthe tool, aguard o rother part
that isdamaged should becarefully checked
todetermine that i twill o perate properly and
perform itsintended function - check for
alignment ofmoving parts, binding ofmoving
parts, breakage ofparts, mounting and any
other conditions that m ay a ffect itsoperation.
Aguard o rother part that i sdamaged should
beproperly repaired orreplaced.
20. N EVER
LEAVE THE TOOL RUNNING
UNATTENDED. TURN THE POWER "OFF".
Do not walk away from a running tool until
the blade comes to a complete stop and the
tool is unplugged from the power source.
21. DO NOT OVERREACH. Keep proper footing
and balance at all times.
22. MAINTAIN TOOLS WITH CARE. Keep
tools sharp and clean for best and safest
performance. Follow instructions for
lubricating and changing accessories.
23. WARNING: Dust generated from certain
materials can be hazardous to your health.
Always operate saw in well-ventilated area
and provide for proper dust removal.
24. [,&
DANGER
] Peoplewith electronic
devices, such as pacemakers, should consult
their physician(s) before using this product.
Operation of electrical equipment in close
proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
5