Table of Contents
Advertisement
GS-SR125E System Installation Guide
5.9.
Hard Disk Drive Installation
Step 1. Pull the hard disk drive tray handle and remove the tray
from the chassis (Fig-21). Insert the hard disk drive into the tray.
Secure each hard disk drive with screws (Fig-22 to 24).
Figure 21
Figure 22
Figure 23
Figure 24
Step 2. After securing the hard disk drive with the screws, hold
the hard drive handle at open position, place the tray into chassis
(Fig-25) and push the hard disk drive tray handle to the closed
position. (Fig-26)
20
Advertisement
Table of Contents
