Routine Maintenance - Craftsman 10872 - Mini Circular Saw Operator's Manual

ROUTINE MAINTENANCE
/_WARNING:
DO NOT at any time let brake fluids,gasoline, petroleum-
based products, penetrating oils, etcocome In contact with plastic parts.
Chemicals can damage, weaken or destroyplastic,which may result In serious
personal Injury.
I,IU,PlIIILUl .............................. ,ll,,I,,,,,, ,,111 , I, I
Periodic maintenanceallowsfor long life and trouble-free operation. A cleaning,
lubrication and maintenance schedule should be maintained. As a common preventative
maintenance practice, foilow these recommended steps:
,/_WARNING:
For your safety,ALWAYSturn off switch and unp|ug clreular !
saw from the power source before performingany maintenance or cleaning.
1. When work has been completed,clean the toolto allow smooth functioning of the
tool overtime..
2. Usa clean damp cloths to wipe the tool.
3o Check the state of all electricalcables.
4. Keep the motor alr openings free from o11, grease and sawdust or woodchips, and
store tool in a dry place.
5_ Be certain that ali moving parts are weFIlubricated, partlcular]y after lengthy exposure
to damp and/or dirty conditions.
LUBRICATION
All of the bearings in this tool are lubricated witha sufficlent a mountof hlgh-grade
lubricant for the life of the tool under normal operating conditions.Therafora, no further
lubrication is required°
32