Led Worklight - Craftsman 10872 - Mini Circular Saw Operator's Manual

USING THE LASER TRAC
TM
LASER LIGHT FEATURE
(Figs. 10 and 10a)
................................................................... i
i _WARNING:
LASER LIGHT. LASER RADIATION. Avoid Direct Eye Exposure.
DO NOT stare into beam, Only turn laser beam on when the saw is on the
workplece. Class Ilia laser°
ll,l,,,ll i,,Hllll L
Yourcircular saw has a built-in laser light To activate laser light switch, saw must be
plugged into power source
1 DO NOT turn the laser beam on until the saw is on the workpiece.
2, Mark the line of cut on the workptece,
3. Adjust the cutting angle and cutting depth as needed.,
4 Plug in the saw and push the iaser switch forward to turn on the laser.
5. Follow instructions in "STARTING A CUT", (Page 24)
6. Always shut off the laser light when you are finished cutting
Fig. 10 1 LASER ON
Laser Trac
TM
Laser Light
LED WORKLIGHT (Fig, 10a)
Your circular saw has a built-in worklight for better vtsibi/lty when cutting To turn
on the LED work]ight, the saw must be plugged in, Push the switch from OFF to LED°
Fig. 10a LED ON
23