Advertisement
Quick Links
instructions carefully and familiarize yourself with the different parts.
please contact afifurnishings at customerservice@afifurnishings.com or 1-800-955-3726
PARTS LIST
1
HEADBOARD PANEL 1 PC
2
LEFT LEG
1 PC
3
RIGHT LEG
1 PC
4
PILLOW STOP
1 PC
5
PACKING STICK
2 PCS
6
WOOD DOWELS
8 PCS
(Factory Installed)
7
FOOTBOARD
1 PC
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
Step 1
Remove packing stick (5) from headboard panel (1) and
6
A
B
A
B
2
BACK VIEW
A
B
To ensure lasting safety, we recommend that you periodically check
BED WITH MATCHING FOOTBOARD
ASSEMBLY INSTRUCTIONS
Before assembling your bed, please read through these
ATTENTION! If you receive a damaged or defective item,
Instructions apply for bed sizes
QUEEN > KING
A
JCB M6 X 110mm (4 3/8") - 4 pcs
B
Barrel nut - 4 pcs
Spare - 1 pc
5
1
B
B
4
6
3
Congratulations!
Your headboard is now assembled.
that all screws are tight and all parts are secure.
Spare - 1 pc
DISCARD
Step 2
Attach the legs (2) and (3) to headboard panel (1), and
pillow stop (4) using JCB (A) and barrel nut (B).
Tighten with the Allen wrench (C).
FRONT VIEW
A
TAPER INSIDE AND
HOLES TO THE FRONT.
A
ASSEMBLE
HARDWARE
C
Allen wrench - 1pc
Spare - 1pc
.
1
Adult assembly
5
CODE
ITEM
HBFB-MSN
R-28774X
PO :
READY
TO
ITEM
R-28775X
Page 1 of 2
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for AFi R-28774X
Summary of Contents for AFi R-28774X
- Page 1 HOLES TO THE FRONT. BACK VIEW CODE ITEM ITEM HBFB-MSN R-28774X R-28775X PO : Congratulations! Your headboard is now assembled. To ensure lasting safety, we recommend that you periodically check that all screws are tight and all parts are secure.
- Page 2 HARDWARE HEADBOARD BOX 1 FOOTBOARD SIDE RAILS BOX 2 Adult assembly Step 1 Attach the side rails (04) to the headboard (02) and footboard (03) using the bed hook as shown below. UPPER LOWER Use the upper set of pins when using mattress only, storage drawers or Trundle bed.
- Page 3 SLAT KIT ASSEMBLY INSTRUCTION READY ( QUEEN ) Before assembling your bed slat kit, please read through these ASSEMBLE instructions carefully and familiarize yourself with the different parts. Please note that you will require a Phillips screwdriver and an Allen wrench. ATTENTION! If you receive a damaged or defective item, please contact afifurnishings at customerservice@afifurnishings.com or 1-800-955-3726 PARTS LIST...
- Page 4 ( QUEEN ) Step 3 Lay the slat section (01) onto the bed. Attach support rail(02)to slat section(01). Using JCB (B) and cap nut (C) tighten with the Allen wrench (G). Repeat for section 2. Adult assembly SECTION 1 SECTION 2 1 3/8”...
- Page 5 TRUNDLE BED ASSEMBLY INSTRUCTIONS READY TWIN XL Before assembling your Trundle bed, please read through these instructions carefully. Familiarize yourself with the different parts. ATTENTION! If you receive a damaged or defective item, please contact afifurnishings at customerservice@afifurnishings.com or 1-800-955-3726 Allen wrench Adult assembly PO :...
- Page 6 TWIN XL PARTS LIST HARDWARE 1 BOX SIDE CROSS RAIL 2 PCS FRONT PANEL 1 PC CENTER CROSS RAIL 1 PC SLAT KIT 2 SET FRONT RAIL 1 PC BACK RAIL 1 PC Attach the side cross rails (05) and center cross rail (06) to the front and back rail (03)(04), using Step 1 L bracket (C), JCB M6 X 1 5/8”(A).
- Page 7 TWIN XL Attach the front panel (02) to the front rail as shown, using JCB M6 X 5/8” (B). Step 2 Tighten with the Allen wrench (D). Adult assembly JCB M6 X 5/8” Allen wrench Lay the slat kit (07) onto the rail assembly as shown, using JCB M6 X 1 5/8” (A). Step 3 Tighten with the Allen wrench (D).
Need help?
Do you have a question about the R-28774X and is the answer not in the manual?
Questions and answers