Texas Instruments TINSPIRE Software Installation Manual page 63

1 Subnet Servers. Here you will find your server.
2 Server Name. Once you've selected the server from the
Subnet. It is made up from the hostname and
connection.
3 IP Address
4 Total users / In use. This is how many licenses are
currently being used.
5 Total users / Total. This is the total number of licenses you
have purchased and activated.
6 Total users / Queued. You would have a number here if
all the licenses were in use and others were waiting for a
seat to be available.
7 Commuter / In use. This is the number of borrowed
licenses.
8 Commuter / Total. This is the numeric value of total
licenses that are available to be borrowed. It is set by
either the default (100%) or the percentage that you set
in systems variables.
Note: Although a percentage is specified during the set
up process, the numeric value is shown on this screen. For
example, if you had total licenses and you wanted half to
be available for a borrowing you would enter "-com 50"
(no quotes) in the variable value under New System
Variable to represent 50%. In this field on this screen you
would see "13."
Installing and Activating TI Software 59