Deployment - Texas Instruments TINSPIRE Software Installation Manual

 MAX_DAYS_TO_BORROW_LICENSE
#Configuration item that specifies the time (in days) the user is allowed to
borrow a license.
#Accepted values: 1-365
MAX_DAYS_TO_BORROW_LICENSE=14
--------------------------------------------------
License type: Concurrent only
Comment: This field specifies how many days a license can be
borrowed before it needs to be returned. The default is 14 days. The
accepted values are between one day and one year (365 days).
 ACTIVATION_TIME_LIMIT
#Configuration item that sets a fixed amount of time(seconds) to obtain
random value when 3 attempt silent activation. Default value is set to 10
minutes.
#Accepted values: seconds
ACTIVATION_TIME_LIMIT=600
------------------------------------------
License types: Volume and Concurrent
Comment: This field specifies the wait time between activation retries.
The system will automatically try to activate up to three times. This
value provides you a method to determine how many seconds to wait
before retrying the activation.

Deployment

There are many deployment packages you can use to distribute the
software. Texas Instruments does not make any recommendations or
endorse any particular brand or describe steps on using these tools.
Please see your deployment tool's instructions for more information.
If you experience any problems in deploying our software contact the
Software Service Center at education.ti.com/go/softwarecenter or 1-800-
TI-CARES.
Note: If you did not choose SILENT=YES in the setup.ini, the user will see
the same install screens as a single license user as shown earlier in this
document.
42 Installing and Activating TI Software