Table of Contents
Advertisement
15. Click the Tunnel Setting tab, then select The tunnel endpoint is specified by this IP address.
Enter the WAN (Internet) IP address of the Broadband VPN Gateway, as shown below.
16. Click the Authentication Methods tab, then click the "Edit" to see the screen like the
example below.
17. Select Use this string to protect the key exchange (preshared key), then enter your pre-
shared key in the field provided.
18. Click "OK" to save your changes and return to the Authentication Methods tab of the Edit
Rule Properties screen.
19. Click "Close" to return to the DUT to Win2K properties screen. The "To DUT" filter
should now be listed, as shown below.
Figure 65: Tunnel Setting
Figure 66: Authentication Method
VPN
89
Advertisement
Table of Contents
