Table of Contents
Advertisement
5. Ensure your TCP/IP settings are correct.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default
Windows setting. Using this is recommended. By default, the TW100-BRV204 will act as a
DHCP Server.
Restart your PC to ensure it obtains an IP Address from the TW100-BRV204.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the
following changes.
•
In the Default gateway field, enter the TW100-BRV204 's IP address and click OK. Your
LAN administrator can advise you of the IP Address they assigned to the TW100-
BRV204.
•
If the DNS Server fields are empty, select Use the following DNS server addresses, and
enter the DNS address or addresses provided by your ISP, then click OK.
Figure 20: TCP/IP Properties (Windows XP)
PC Configuration
29
Advertisement
Table of Contents
