Table of Contents
Advertisement
Data - Status Screen
Internet
Connection Method
Broadband Modem
Internet Connection
Internet IP Address
"Connection Details"
Button
LAN
IP Address
Network Mask
DHCP Server
System
Device Name
Firmware Version
"System Data"
Button
Buttons
Connection Details
System Data
Restart Router
Refresh Screen
This indicates the current connection method, as set in the Setup
Wizard.
This shows the connection status of the modem.
Current connection status:
•
Active
•
Idle
•
Unknown
•
Failed
If there is an error, you can click the "Connection Details" button
to find out more information.
This IP Address is allocated by the ISP (Internet Service Pro-
vider).
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the type of
connection, a "log" may also be available.
The IP Address of the TW100-BRV204.
The Network Mask (Subnet Mask) for the IP Address above.
This shows the status of the DHCP Server function - either
"Enabled" or "Disabled".
For additional information about the PCs on your LAN, and the
IP addresses allocated to them, use the PC Database option on
the Advanced menu.
This displays the current name of the TW100-BRV204.
The current version of the firmware installed in the TW100-
BRV204.
Clicking this button will open a Window which lists all system
details and settings.
View the details of the current Internet connection. The sub-
screen displayed will depend on the connection method used. See
the following sections for details of each sub-screen.
Display all system information in a sub-window.
Restart (reboot) the Router. You will have to wait for the restart
to be completed before continuing.
Update the data displayed on screen.
Operation and Status
33
Advertisement
Table of Contents
