Table of Contents
Advertisement
IP Address
MAC Address
Buttons
Add as New
Entry
Update Selected
PC
Clear Form
Refresh
Generate Report
Standard Screen
Select the appropriate option:
•
Automatic - The PC is set to be a DHCP client (Windows: "Ob-
tain an IP address automatically"). The TW100-BRV204 will
allocate an IP address to this PC when requested to do so. The IP
address could change, but normally won't.
•
DCHP Client - Reserved IP Address - Select this if the PC is set
to be a DCHP client, and you wish to guarantee that the TW100-
BRV204 will always allocate the same IP Address to this PC.
Enter the required IP address. Only the last field is required; the
other fields must match the TW100-BRV204.
•
Fixed IP Address - Select this if the PC is using a Fixed (Static)
IP address. Enter the IP address allocated to the PC. (The PC must
be configured to use this IP address.)
Select the appropriate option
•
Automatic discovery - Select this to have the TW100-BRV204
contact the PC and find its MAC address. This is only possible if
the PC is connected to the LAN and powered On.
•
MAC is - Enter the MAC address on the PC. The MAC address is
also called the "Hardware Address", "Physical Address", or "Net-
work Adapter Address". The TW100-BRV204 uses this to provide
a unique identifier for each PC. Because of this, the MAC address
can NOT be left blank.
Add a new PC to the list, using the data in the "Properties" box.
If "Automatic discovery" (for MAC address) is selected, the PC will be
sent a "ping" to determine its hardware address. This will fail unless
the PC is connected to the LAN, and powered on.
Update (modify) the selected PC, using the data in the "Properties"
box.
Clear the "Properties" box, ready for entering data for a new PC.
Update the data on screen.
Display a read-only list showing full details of all entries in the PC
database.
Click this to view the standard "PC Database" screen.
Other Features and Settings
109
Advertisement
Table of Contents
