Chevrolet CAMARO - 2010 Owner's Manual page 164

6-30 Infotainment System
Using the Re-dial Command
1. Press . The system
responds Ready followed by
a tone.
2. After the tone, say Re-dial .
The system responds Re-dial
using <phone name> and dials
the last number called from the
connected Bluetooth phone.
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
Press to answer the call.
Press to ignore a call.
Call Waiting
Call waiting must be supported on
the Bluetooth phone and enabled by
the wireless service carrier to work.
Press to answer an
incoming call when another call
is active. The original call is
placed on hold.
Press again to return to the
original call.
To ignore the incoming call,
no action is required.
Press to disconnect the
current call and switch to the call
on hold.
Three Way Calling
Three Way Calling must be
supported on the Bluetooth phone
and enabled by the wireless service
carrier to work.
1. While on a call press
The system responds Ready
followed by a tone.
2. Say Three-way call . The
system responds Three-way
call, please say dial or call .
3. Use the dial or call command to
dial the number of the third party
to be called.
4. Once the call is connected,
press
together.
Ending a Call
Press
Muting a Call
During a call, all sounds from inside
the vehicle can be muted so that the
person on the other end of the call
cannot hear them.
To Mute a call
1. Press
responds Ready followed by
a tone.
.
2. Say Mute Call . The system
responds Call muted .
to link all the callers
to end a call.
. The system