Chevrolet CAMARO - 2010 Owner's Manual page 163

If the system does not
recognize the number, it
confirms the numbers
followed by a tone. If the
number is correct, say
Yes . The system responds
OK, Dialing and dials the
number. If the number is
not correct, say No .
The system will ask for the
number again.
Using the Digit Dial Command
1. Press . The system
responds Ready followed by
a tone.
2. Say Digit Dial . The system
responds Digit dial using
<phone name>, please say the
first digit to dial followed by
a tone.
3. Say the digits to be dialed one at
a time. The system repeats back
the digit it heard followed by
a tone.
4. Continue entering digits until the
number to be dialed is complete.
After the whole number has
been entered, say Dial . The
system responds OK, Dialing
and dials the number.
If an unwanted number is
recognized by the system,
say Clear at any time to
clear the last number.
To hear all of the numbers
recognized by the system,
say Verify at any time.
Using the Call Command
1. Press . The system
responds Ready followed by
a tone.
2. Say Call . The system responds
Call using <phone name>.
Please say the name tag
followed by a tone.
Infotainment System
3. Say the name tag of the person
to call.
If the system recognizes
the name tag it responds
OK, calling, <name tag>
and dials the number.
If the system does not
recognize the name tag, it
confirms the name tag
followed by a tone. If the
name tag is correct, say
Yes . The system responds
OK, calling, <name tag>
and dials the number. If the
name tag is not correct, say
No . The system will ask
for the name tag again.
Once connected, the person called
will be heard through the audio
speakers.
6-29