Chevrolet CAMARO - 2010 Owner's Manual page 162

6-28 Infotainment System
Using the Delete Command
The delete command is used to
delete specific name tags.
To delete name tags:
1. Say Delete . The system
responds Delete, please say
the name tag followed by
a tone.
2. Say the name tag to be deleted.
The system responds Would
you like to delete, <name tag>?
Please say yes or no .
If the name tag is correct,
say Yes to delete the
name tag. The system
responds OK, deleting
<name tag>, returning to
the main menu.
If the name tag is incorrect,
say No . The system
responds No. OK, let's try
again, please say the
name tag.
Using the Delete All Name Tags
Command
The delete all name tags command
deletes all stored phone book name
tags and route name tags for
OnStar if stored.
To delete all name tags:
1. Press . The system
responds Ready followed by
a tone.
2. Say Delete all name tags .
The system responds You are
about to delete all name tags
stored in your phone directory
and your route destination
directory. Are you sure you
want to do this? Please say
yes or no.
Say Yes to delete all
name tags.
Say No to cancel the
function and return to the
main menu.
Making a Call
Calls can be made using the
following commands:
Dial
Digit Dial
Call
Re-dial
Using the Dial Command
1. Press . The system
responds Ready followed by
a tone.
2. Say Dial . The system responds
Dial using <phone name>.
Number please followed by
a tone.
3. Say the entire number without
pausing.
If the system recognizes
the number, it responds
OK, Dialing and dials the
number.