1. Manuals
  2. Brands
  3. U.S. Solid Manuals
  4. Dispenser
  5. USS-ZCUT13
  6. User manual

U.S. Solid USS-ZCUT13 User Manual

Auto tape dispenser
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

Auto Tape Dispenser
User Manual
Model: USS-ZCUT13
This manual should be made available to all users of this
equipment. For best results, and for maximum durability of
the equipment, carefully read and follow all instructions.
For questions or concerns, e-mail service@ussolid.com, visit www.ussolid.com,
or call (800) 243-5428

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the USS-ZCUT13 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for U.S. Solid USS-ZCUT13

Summary of Contents for U.S. Solid USS-ZCUT13

  • Page 1 Auto Tape Dispenser User Manual Model: USS-ZCUT13 This manual should be made available to all users of this equipment. For best results, and for maximum durability of the equipment, carefully read and follow all instructions. For questions or concerns, e-mail service@ussolid.com, visit www.ussolid.com,...

  • Page 2: Parts Description

    I. Precautions Please make sure that voltage is matched with the required voltage. Change from "Auto" working condition to "Manual" condition, please press  AUTO/MANUAL key for over one second.  Do not disassemble the machine randomly;it may result in the inferior precision and blockage.

  • Page 3: Technical Parameter

    Can cut various types of adhesive and non-adhesive tapes, but it is not recommended to use strong adhesive tapes such as double-sided tape and fiber  tape; The photocell switch detects the tape; The stepper motor ensures high cutting accuracy and fast cutting speed; ...

  • Page 4: Operation Steps

    ENTER Key After setting the length, press the ENTER key to confirm. The number will stop  blinking at this time. REV Key Function 1: In the setting state, press this key to increase the number.  Function 2: In the manual state, press this key to rewind the tape. FWD Key Function 1: In the setting state, press this key to decrease the number.

  • Page 5: Troubleshooting

    The installation and removal of tapes can only be done in manual mode, and the steps for installing tapes are as follows:  Switch the machine to manual mode. Install the tape roll on the roller. Pull the tape end out from the roller, thread it through the clamp axis, and paste it to the feed wheel(If you are cutting a non-adhesive material, please use a tape to stick its end to the feed wheel.).

  • Page 6: Maintenance

    After the first 30 days but still within 1 year from the date of delivery, U.S. Solid will send new or refurbished replacement parts at no charge, allowing you to...

Table of Contents