Advertisement
Quick Links
Automatic Label Dispenser
This manual should be made available to all users of this
equipment. For best results and for maximum durability of
the equipment, carefully read and follow all instructions.
For questions or concerns, e-mail service@ussolid.com, visit www.ussolid.com, or
call (800) 243-5428
Advertisement
Related Manuals for U.S. Solid USS-LD00014-120MM
Summary of Contents for U.S. Solid USS-LD00014-120MM
- Page 1 Automatic Label Dispenser This manual should be made available to all users of this equipment. For best results and for maximum durability of the equipment, carefully read and follow all instructions. For questions or concerns, e-mail service@ussolid.com, visit www.ussolid.com, or call (800) 243-5428...
-
Page 2: Product Specifications
I. Product Specifications I. Gar USS-LD00014-120MM USS-LD00014-160MM 4 - 120mm (0.24 to 4.7 4 - 160 mm (0.24 to 6.3 Model in.) in.) Applicable Label 4 - 200 mm (0.16 to 7.87 in.) Width Applicable Label 10 - 75 mm (0.39 to 3 in.) Length 250 mm (9.84 in.) - Page 3 Configuration II for Large Core Diameter III. Operating Instructions I. Gar 1. Mount the correct Hanger Shaft onto the machine according to your label’s core diameter(Configuration I or Configuration II). 2. Install one label roll onto the Hanger Shaft with the labels facing out. 3.
- Page 4 grip the label paper end into the groove on the Rewinder Shaft and fix the end with the U Pin. Make sure the paper is fairly straight. (See the attached picture.) 5. Gently adjust the position of the white rubber on the Label Guide rod.
-
Page 5: Warranty
After the first 30 days but still within the first 1 year of delivery, U.S. Solid will send new or refurbished replacement parts at no charge so you can repair the product on your own.
Need help?
Do you have a question about the USS-LD00014-120MM and is the answer not in the manual?
Questions and answers