Changing Channel Settings; Automatically Scanning For Channels; Hiding Channels - Dynex DX-15E220A12 User Manual

22
DX-15E220A12

Changing channel settings

Automatically scanning for channels

When you scan for channels, your TV searches for
channels available in your viewing area and stores the
channel information in the channel list. When you press
CH+ or CH–, your TV goes to the next or previous channel
in the channel list.
If the TV signal source changes, for example you change
from an outdoor antenna to cable TV (no box), you need
to scan for channels again.
Note
You do not need to scan for channels unless the
available channels have changed since you ran the
Setup Wizard. For more information, see "Turning on
your TV for the first time" on page 17.
To automatically scan for channels:
1
Press MENU. The on-screen menu opens with the
Picture menu displayed.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
BackLight
Advanced Video
Reset Picture Settings
Move Select
Adjust settings to affect picture quality
2
Press or to highlight Channels, then press .
The Channels menu opens with Auto Channel Scan
highlighted.
Picture
Auto Channel Scan
Add/Skip Channels
Favorites
Channel Label
Channel Strength
Audio Only
Auto Zoom
Move Select
Adjust the audio with the picture turned off
3
Press or to select your signal type. You can
select:
• Antenna—Select this option if you use an
antenna. Your TV scans for analog (VHF and UHF)
and digital channels in your area.
• Cable—Select this option if you have cable TV
and do not have a cable TV box. Your TV scans for
analog and digital channels in your area.
• Cable/Satellite Box—Select this option if you
use a cable or satellite TV box. Your TV does not
scan for channels because the cable or satellite
TV box provides the channel information.
Audio Settings Channels
Standard
55
29
Back Exit
MENU EXIT
Audio Settings Channels
Back
MENU EXIT Exit
4
Press ENTER
to start the auto channel scan.
Move Select
Select Antenna if using an antenna for standard or HD TV
If you selected Antenna or Cable, your TV searches
automatically for available channels in your area and
stores the channel information in the channel list.
This may take several minutes. While scanning, the
TV displays a progress report.
- Or-
If you selected Cable/Satellite Box, the channel
search is not necessary.
Note
You can press EXIT at any time to stop scanning, but
you must run the scan later to complete the process.

Hiding channels

You can hide channels in the channel list. When you press
CH+ or CH–, your TV skips the hidden channels. You can
still tune to a hidden channel by pressing the number
buttons for the channel.
To hide channels:
1
Press MENU. The on-screen menu opens with the
Picture menu displayed.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
BackLight
Advanced Video
Reset Picture Settings
Move Select
Adjust settings to affect picture quality
2
Press or to highlight Channels, then press .
The Channels menu opens.
Picture
Auto Channel Scan
Add/Skip Channels
Favorites
Channel Label
Channel Strength
Audio Only
Auto Zoom
Move Select
Adjust the audio with the picture turned off
Changing channel settings
RF CH 0
Back Exit
MENU EXIT
Audio Settings Channels
Standard
55
29
Back
MENU EXIT Exit
Audio Settings Channels
Back
MENU EXIT Exit