Cisco CP-3911 - Unified SIP Phone 3911 VoIP Administration Manual page 51

Chapter 3 Setting Up the Cisco Unified IP Phone
Task
Connect the handset to the
1.
Handset port.
Connect the power supply to
2.
the Cisco DC Adapter port.
Connect a Category 3 or 5
3.
straight-through Ethernet cable
from the switch to the network
port.
Cisco Unified SIP Phone 3911 Administration Guide for Cisco Unified Communications Manager
OL-14029-01
Notes
—
Optional.
—
Installing the Cisco Unified IP Phone
Reference
See the"Handset" section on
page 3-5 for guidelines.
See the "Providing Power to the
Cisco Unified IP Phone"
section on page 2-3 for
guidelines.
See the "Network Port" section
on page 3-5 for guidelines.
3-7