Communications Manager - Cisco CP-3911 - Unified SIP Phone 3911 VoIP Administration Manual

Chapter 1 An Overview of the Cisco Unified IP Phone
Checklist for Configuring the Cisco Unified IP Phone in Cisco Unified

Communications Manager

Table 1-2 Checklist for Configuring the Cisco Unified SIP Phone 3911 in
Cisco Unified Communications Manager
Task
1. Gather the following information
about the phone:
Phone Model
•
MAC address
•
Physical location of the phone
•
Name or user ID of phone user
•
• Device pool
Partition, calling search space, and
•
location information
Associated directory number (DN)
•
to assign to the phone
Cisco Unified Communications
•
Manager user to associate with the
phone
Cisco Unified SIP Phone 3911 Administration Guide for Cisco Unified Communications Manager
OL-14029-01
For general information about configuring phones in Cisco Unified
Communications Manager, refer to the "Cisco Unified IP Phones" chapter in
Cisco Unified Communications Manager System Guide and the "Cisco Unified IP
Phone Configuration" chapter in Cisco Unified Communications Manager
Administration Guide.
Table 1-2 provides an overview and checklist of configuration tasks for the
Cisco Unified IP Phone in Cisco Unified Communications Manager
Administration. The list presents a suggested order to guide you through the
phone configuration process. Some tasks are optional, depending on your system
and user needs. For detailed procedures and information, refer to the sources in
the list.
Purpose
Provides list of configura-
tion requirements for setting
up phones.
Identifies preliminary con-
figuration that you need to
perform before configuring
individual phones.
Overview of Configuring and Installing Cisco Unified IP Phones
For More Information
Refer to Cisco Unified Com-
munications Manager System
Guide,
"Cisco Unified IP Phone"
chapter.
See the
Available for the Cisco
Unified IP Phone" section on
page
"Telephony Features
5-1.
1-11