HP C1593B - SureStore DAT Tape 5000e Drive Installation Manual page 14

Using HP TapeAssure
Note If the program does not work correctly or hangs during processing, there
may be a compatibility problem with the SCSI card. The current version of
HP TapeAssure may not support Adaptec 1510 cards (6360 chip set) and
Symbios cards.
1 Once it is installed, run TapeAssure from the Programs menu in the
Windows Start menu. HP TapeAssure will check for the presence of a SCSI
controller and its driver software and identify the SCSI IDs of existing
SCSI devices.
2 View the current configuration and determine whether you need to change
the SCSI ID from the default of 3.
3 Exit TapeAssure after you view the SCSI configuration information.
HP SureStore DAT
Installation Guide
1-9