Cisco SPA921 - - IP Phone Provisioning Manual page 88

Provisioning Field Reference
Configuration Profile Parameters
Cisco Small Business IP Telephony Devices Provisioning Guide
Parameter Name
Resync_From_SIP
Resync_After_Upgrade_Attempt
Resync_Trigger_1,
Resync_Trigger_2
Resync_Fails_On_FNF
Profile_Rule
Description and Default Value
Enables a resync to be triggered via a SIP
NOTIFY message.
The default value is Yes.
Triggers a resync after every firmware
upgrade attempt.
The default value is Yes.
Configurable resync trigger conditions. A
resync is triggered when the logic equation
in these parameters evaluates to TRUE.
The default value is (empty).
Determines whether a file-not-found
response from the provisioning server
constitutes a successful or a failed resync.
A failed resync activates the error resync
timer.
The default value is Yes.
This parameter is a profile script that
evaluates to the provisioning resync
command. The command specifies the
protocol (TFTP, HTTP, or HTTPS) and an
associated URL.
If the command is not specified, TFTP is
assumed, and the address of the TFTP
server is obtained through DHCP option 66.
In the URL, either the IP address or the
FQDN of the server can be specified. The
file name can have macros, such as $MA,
which expands to the device MAC address.
The default value is /spa$PSN.cfg.
4
86