Cisco SPA921 - - IP Phone Provisioning Manual page 62

Creating Provisioning Scripts
Data Types
Cisco Small Business IP Telephony Devices Provisioning Guide
Number of Frequencies = 1
Frequency 2 = 440 Hz at –10 dBm
Example 2—Dial Tone:
350@-19,440@-19
Number of Frequencies = 2
Frequency 1 = 350 Hz at –19 dBm
Frequency 2 = 440 Hz at –19 dBm
• ToneScript—A mini-script that specifies the frequency, level and cadence
parameters of a call progress tone. May contain up to 127 characters.
Syntax: FreqScript;Z
CadScript except that each on/off segment is followed by a frequency
components parameter: Z
[,on /off /f [,on
i,4 i,4 i,4
n [+n ]+n [+n [+n
1 2 3 4
components given in the FreqScript are used in that segment; if more than
one frequency component is used in a segment, the components are
summed together.
Example 1—Dial tone:
350@-19,440@-19;10(*/0/1+2)
Number of Frequencies = 2
Frequency 1 = 350 Hz at –19 dBm
Frequency 2 = 440 Hz at –19 dBm
Number of Cadence Sections = 1
Cadence Section 1: Section Length = 10 s
Number of Segments = 1
Segment 1: On=forever, with Frequencies 1 and 2
Total Tone Length = 10s
[;Z ]. The section Z
1 2
= D (on /off
1 1 i,1
/off /f [,on /off
i,5 i,5 i,5 i,6 i,6
[+n ]]]]] and 1 < n < 6 indicates which of the frequency
5 6 k
is similar to the S
1 1
/f [,on /off /f [,on
i,1 i,1 i,2 i,2 i,2
/f ]]]]]), where fi,j =
i,6
2
section in a
/off /f
i,3 i,3 i,3
60