Spectrum LC36 Assembly Instructions

Assembly Instructions
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts or
accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
1
Attach glides to base
1. Place blocking on one side of the cabinet to lift it off the floor.
2. Thread on (2) glides but do not tighten. The glides can be
adjusted later if the floor is uneven.
3. Repeat on the other side.
4. Remove blocking.
1/2-13 x 1"
Glide
X4
Blocking
(4) 055194
1/2-13 x 1" Glide
LC36 36" Storage Cabinet
24022
Assembly tip: Do not tighten component fasteners completely
until all have been installed. Keeping them loose will help with
alignment between parts during assembly.
1
/
"
4
0600098 Page 1 of 2