OpenEye MV Series Quick Start Manual

MV-Series Cloud Managed Appliance Quick Start Guide
This guide will assist you with the initial setup of your cloud-managed appliance and recording software. This guide
includes hardware setup, software setup, and connecting your appliance to the Web Services Portal.
NOTE: The OE-MV appliance with PoE IP Camera Connection capability has been discontinued. Documentation
on discontinued models contains the latest information at the time the product was discontinued.
OE-MV Cloud Manged Appliance Quick Start Guide Hardcopy
Click the link if you need to download the original hardcopy of the
Getting Started
1. Connect the network cable intended for remote connections to the Client Network Port.
2. Connect the supplied mouse using a USB port.
3. Connect a monitor using the HDMI® port.
4. Connect the cameras to PoE ports, or the external camera network.
5. Connect the supplied power cord into the recorder and connect it to a power source.
See Setup Wizard for logging into the server software and connecting to OpenEye Web Services (OWS).
After completing the Setup Wizard, and logging in to OWS, see
the recorder to OWS.
Default Administrator Username and Password
When the server software is launched, the user will be prompted to log in. On Linux systems, this will launch
automatically after powering on the recorder. On Windows systems, users will need to sign in to Windows, then launch
Apex Server Home from the desktop.
The default Administrator usernames and passwords for are listed below:
NOTE: Once registered to OWS, a user's OWS credentials can be used to log in, in addition to the default
credentials listed below.
LINUX SYSTEM LOG IN
Username: admin
Copyright © OpenEye 2023
OE-MV QSG included with the boxed contents.
Registering a Recorder to an OWS Account to connect
1