OpenEye MV Series Quick Start Manual

MV-SERIES CLOUD MANAGED APPLIANCE
This guide will assist you with the initial setup of your cloud managed server and recording software. This guide includes hardware setup,
software setup, and connecting your server to the Web Services Portal.
GETTING STARTED
Connect the network cable intended for remote connec-
1.
tions to the Client Network Port.
NOTE The Camera Network Port is intended for use with a
dedicated camera network.
Connect the supplied keyboard and mouse using the USB
2.
ports.
Connect a monitor using the HDMI
3.
Plug the supplied power cord into the recorder and connect
4.
it to a power source.
Power
4
Input
QUICK START GUIDE
port.
®
HDMI
®
Monitor
Reset
3
Button
Reset
HDMIx2 USB3.0
2
Keyboard and
Mouse
DEFAULT USERNAME & PASSWORD
LINUX:
Username: admin
Password: 1234
Complete the First Time Wizard for basic system setup.
CONNECTING TO OPENEYE WEB SERVICES
Go to Setup , and then navigate to the Remote
1.
Services tab.
Click Web Services.
2.
Enter the Recorder Name & Registration Code.
3.
NOTE Reference the OWS Software Manual for
instructions on fi nding your Recorder Registration
Code.
Click Connect.
4.
CLIENT CAMERA
1
Camera
Network
Port
Client
Network
Port
Copyright ©2021 OpenEye. All Rights Reserved. Information
contained in this document is subject to change without prior
notice. OpenEye does its best to provide accurate information but
cannot be held responsible for typos or mistakes.
37580AA