OpenEye MV Series Quick Start Manual

MV-SERIES CLOUD MANAGED APPLIANCE
This guide will assist you with the initial setup of your cloud managed server and recording software. This guide in-
cludes hardware setup, software setup, and connecting your server to the Web Services Portal.

GETTING STARTED

Connect the network cable intended for remote
1.
connections to the Client Network Port.
NOTE The Camera Network Port is intended for use
with a dedicated camera network.
Connect the supplied mouse using a USB port.
2.
Connect a monitor using the HDMI
3.
Plug the supplied power cord into the recorder and
4.
connect it to a power source.
Power
Input
4
QUICK START GUIDE
port.
®
HDMI
®
Monitor
Reset
Button
3
Reset
HDMIx2 USB3.0
2
Mouse
DEFAULT USERNAME & PASSWORD
LINUX:
Username: admin
Password: 1234
Complete the First Time Wizard for basic system
setup.

CONNECTING TO OPENEYE WEB SERVICES

Go to Setup
1.
Remote Services tab.
Click Web Services.
2.
Enter the Recorder Name & Registration Code.
3.
NOTE
Reference the OWS Software Manual for
instructions on fi nding your Recorder
Registration Code.
Click Connect.
4.
CLIENT CAMERA
1
Camera
Network
Port
Client
Network
Port
Copyright ©2023 OpenEye. All Rights Reserved.
Information contained in this document is subject to
change without prior notice. OpenEye does its best
to provide accurate information but cannot be held
responsible for typos or mistakes.
, and then navigate to the
37580AB