ME-SERIES CLOUD MANAGED APPLIANCE
This guide will assist you with the initial setup of your cloud managed appliance and recording software. This guide includes hardware
setup, software setup, and connecting your appliance to the Web Services Portal.
GETTING STARTED
Connect the network cable intended for remote
1.
connections to the Client Network Port.
NOTE
The Camera Network Port is intended for use
with a dedicated camera network.
Connect the supplied keyboard and mouse using the
2.
USB ports.
Connect a monitor using the HDMI
3.
Connect the cameras to PoE ports, or the external
4.
camera network.
Plug the supplied power cord into the recorder and
5.
connect it to a power source.
NOTE
When connecting a sensor to the Sensor/Relay
Block, use grounds on the relay side (Relay
1 Ground or Relay 2 Ground) as the sensor
ground.
PoE
4
PoE IP Camera
Connection
QUICK START GUIDE
or VGA port.
®
Sensor/Relay
OUT
IN
AUDIO
HD OUT
Audio In / Out
(not supported)
HDMI
3
APEX SOFTWARE CREDENTIALS
Log in to the software using the default credentials:
Username: admin
Password: 1234
Complete the First Time Wizard for basic system setup.
CONNECTING TO OPENEYE WEB SERVICES
Go to Setup
, and navigate to the Remote Services
1.
tab.
Click Web Services.
2.
Type your Recorder Name & Registration Code.
3.
NOTE
Reference the OWS Software Manual for
instructions on fi nding your Recorder
Registration Code.
Click Connect.
4.
Block
ALARM
VGA
CAMERA
USB 3.0
USB 2.0
Camera
Network
Port
2
or VGA
®
Monitor
Client
Network
Power
Port
Input
1
5
POWER
CLIENT
On / Off
Switch
Keyboard and
Mouse
Need help?
Do you have a question about the ME Series and is the answer not in the manual?
Questions and answers