1. Manuals
  2. Brands
  3. Egimotors Manuals
  4. Offroad Vehicle
  5. RZR Trial S 1000 2025
  6. Owner's manual

Egimotors RZR Trial S 1000 2025 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Egimotors
2025 Owner's Manual
RZR Trial S 1000
QUADRICYCLE
Owner's manual part Number - OM25QRZRS1000
Read this manual carefully. It contains important safety
information. This is an adult QUADRICYCLE only.
Operation is prohibited for those under 18 years of age.
WARNING

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RZR Trial S 1000 2025 and is the answer not in the manual?

Questions and answers

Related Manuals for Egimotors RZR Trial S 1000 2025

Summary of Contents for Egimotors RZR Trial S 1000 2025

  • Page 1 Egimotors 2025 Owner’s Manual RZR Trial S 1000 QUADRICYCLE Owner’s manual part Number - OM25QRZRS1000 Read this manual carefully. It contains important safety information. This is an adult QUADRICYCLE only. Operation is prohibited for those under 18 years of age.
  • Page 2 WELCOME This Owner Manual refers to EGIMOTORS QUADRICYCLE (To be filled in by your Dealer) This Owner’s Manual must always remain inside you Quadricycle (Legal requirement) A digital/printable copy is available on www.egimotors.com Year ________________________________________________________ Model Type___________________________________________________ Code number (spare parts use only) _______________________________...
  • Page 3 If after reading this manual, you still have some questions please do not hesitate to contact your dealer that will be available to help you. Be sure to visit us online at www.Egimotors.it for the latest news and for product and Safety information.
  • Page 4 The original instruction is in English. Other languages are provided as translation of the original Instruction see the EGIMOTORS website for more details and procedure.

  • Page 5: Safety Symbols And Signal Words

    SAFETY SYMBOLS AND SIGNAL WORDS The following signal words and symbols appear throughout this manual and on the QUADRICYCLE. Your safety is involved when these words and symbols are used. Become familiar with their meanings before reading the manual. DANGER DANGER indicates a hazardous situation which, if not avoided, WILL result in death or serious injury.

  • Page 6: Table Of Contents

    INTRODUCTION ..............7 CERTIFICATE OF PRE-DELIVERY INSPECTION ...... 9 SAFETY ................13 FEATURES AND CONTROLS ..........36 7" DISPLAY BY RIDE COMMAND (IF EQUIPPED) ....66 OPERATION ............... 77 EMISSION CONTROL SYSTEMS .......... 83 MAINTENANCE ..............84 SPECIFICATIONS .............. 136 PRODUCTS ...............

  • Page 7: Introduction

    INTRODUCTION INTRODUCTION IMPORTANT INFORMATION WARNING Failure to follow the warnings contained in this manual can result in severe injury or death. This QUADRICYCLE is not a toy and can be hazardous to operate. This QUADRICYCLE handles differently than other QUADRICYCLEs. A collision or rollover can occur quickly, even during routine maneuvers, if you fail to take proper precautions.
  • Page 8 Remove the spare key and store it in a safe place. An ignition key can be duplicated only by ordering a EGIMOTORS key blank (using your key number) and mating it with one of your existing keys. The ignition switch must be replaced if all keys are lost.

  • Page 9: Certificate Of Pre-Delivery Inspection

    CERTIFICATE OF PRE-DELIVERY CERTIFICATE OF PRE-DELIVERY INSPECTION Quadricycle Certificate of Pre-Delivery Year ______ Model______________________________ VIN___________________________________________ Engine Serial Number ____________________________ Key Number ____________ Km / Hours______________ Registration Plate Number_________________________ ASSEMBLY / SERVICE / INSPECTION • - SEALED BATTERY – Apply dielectric grease to terminal bolts and install cable. Check Voltage and charge if below 12,8 Volts.
  • Page 10 CERTIFICATE OF PRE-DELIVERY Quadricycle Certificate of Pre-Delivery Year ______ Model______________________________ VIN___________________________________________ Engine Serial Number ____________________________ Key Number ____________ Km / Hours______________ Registration Plate Number_________________________ TEST RIDE • - ENGINE – Starting acceleration and smoothness. • - IDLE SPEED – Verify when cold and hot the engine idle properly. •...

  • Page 11: Delivery To Customer

    • - SAFETY TRAINING COURSE SVIA – I have instructed the owner on the authorized SVIA Safety training online course. • - PRE-DELIVERY CERTIFICATION – I certify that pre-delivery inspection and service have been perform on this QUADRICYCLE in accordance with the instructions issued by EGIMOTORS. DEALERSHIP NAME____________________________#_________ DELIVERED BY_________________________________________...

  • Page 12: Customer Acceptance

    Registration Plate Number_________________________ CUSTOMER ACCEPTANCE • - I have reviewed the EGIMOTORS warranty Policy / Policies • - I have inspected the Quadricycle and it meets my satisfaction. • - I understand the importance of following the Owner’s Manual and instructions.

  • Page 13: Safety

    Any modifications or installation of non-EGIMOTORS-approved accessories could increase the risk of injury. While you may find aftermarket products similar in design and quality to EGIMOTORS accessories, recognize that some aftermarket accessories or modifications are not suitable because of potential safety hazards to you or others.
  • Page 14 EGIMOTORS recommends that you supervise younger drivers. Set rules and put limits on how, when, and where they are allowed to use this QUADRICYCLE. For...
  • Page 15 SAFETY PREPARE QUADRICYCLE FOR THE RIDE Before starting off, always perform the Pre-Ride Inspection. Failure to inspect and verify that the QUADRICYCLE is in safe operating condition increases the risk of an accident, which can lead to serious injury or death.
  • Page 16 SAFETY ITEM REMARK Seat Belts Check length of belt for damage, check latches for proper operation Exhaust Inspect spark arrester and clean if needed. QUADRICYCLE Debris Remove grass, leaves, and other flammable material or debris, especially near the exhaust system. Passenger Hand Hold Always adjust the hand hold to a comfortable position for your passenger before operating.

  • Page 17: Specification

    Improper tire maintenance can lead to loss of control and an accident, which could result in serious injury or death. To reduce your risk of injury: • Maintain EGIMOTORS recommended tire pressure. Check pressure before operating. Even if your QUADRICYCLE has only been driven a short distance, the tire pressure readings can become higher.
  • Page 18 Use shatterproof goggles or a shatterproof helmet face shield. Such protective eyewear may reduce the risk of foreign material getting in your eyes and help prevent loss of vision. EGIMOTORS recommends wearing approved Personal Protective Equipment (PPE) that have markings indicating they are designed to standards...
  • Page 19 SAFETY Always stay completely inside the QUADRICYCLE and hold the steering wheel or hand holds. Body parts outside of the QUADRICYCLE can be struck by passing objects or crushed during a rollover. Do not put any part of your body outside of the QUADRICYCLE for any reason. Do not hold onto the ROPS frame or put any part of your body on the door.

  • Page 20: Driving Guidelines

    SAFETY DRIVING GUIDELINES Drive responsibly. This QUADRICYCLE is not a toy and can be hazardous to operate. This QUADRICYCLE has higher ground clearance and other features to handle rugged terrain. It can be overturned in situations where some other QUADRICYCLEs may not. Abrupt maneuvers or aggressive driving, even on flat, open areas, can cause loss of control, rollovers, severe injury or death.
  • Page 21 SAFETY Watching someone else go over a jump or go airborne does not mean you can safely do so. EGIMOTORS cannot determine whether any jump you may encounter is appropriate for this QUADRICYCLE. Any jump, even a small one, could be poorly maintained, designed, or not suitable for this QUADRICYCLE and may cause serious injury or death.
  • Page 22 SAFETY Recovering from stalling on a hill If the QUADRICYCLE loses forward speed, apply the brakes gradually and stop. Do not attempt to turn the QUADRICYCLE around. Instead, shift to reverse and allow the QUADRICYCLE to slowly roll straight downhill. Apply light brake pressure to control speed.
  • Page 23 If you cannot safely transport the QUADRICYCLE on your own, contact a recovery and towing service. After any crash, rollover, or other accident, have a EGIMOTORS dealer inspect the QUADRICYCLE for possible damage, including seat belts, ROPS, brakes, suspension, and steering systems.
  • Page 24 SAFETY Be prepared in case your QUADRICYCLE becomes damaged or disabled, especially in remote areas. Consider in advance how to get help and stay safe until it arrives whenever you ride. There is a recovery tow loop at the front and back of the QUADRICYCLE to attach a winch or strap.
  • Page 25 SAFETY All engine exhaust contains carbon monoxide, a deadly gas. Breathing carbon monoxide can cause headaches, dizziness, drowsiness, nausea, confusion, and eventually death. Carbon monoxide is a colorless, odorless, tasteless gas which may be present even if you do not see or smell any engine exhaust.

  • Page 26: Towing A Rzr

    SAFETY TOWING WARNING Towing improperly can alter QUADRICYCLE handling and may cause loss of control or brake instability. This RZR QUADRICYCLE can tow QUADRICYCLEs ONLY of equal or lesser size and weight. When towing a disabled RZR QUADRICYCLE, place the disabled QUADRICYCLE’s transmission in neutral.
  • Page 27 SAFETY TRAILERING SAFETY The weight distribution of the cargo loaded onto the trailer is important and will have an impact on how the QUADRICYCLE handles on the road. Ensure the weight of the cargo is distributed properly and the trailer is not rear, front, or side heavy.
  • Page 28 QUADRICYCLE and cause an accident, resulting in serious personal injury or death. 5. Always tie the frame of the EGIMOTORS QUADRICYCLE to the transporting unit securely with suitable straps or rope. Do not attach tie straps to the front control arm bolt pockets.

  • Page 29: Hauling Cargo

    SAFETY HAULING CARGO WARNING NEVER carry fuel or other flammable liquids on this QUADRICYCLE. Failure to follow this instruction could lead to serious burn injuries or death. Overloading the QUADRICYCLE or carrying cargo improperly can alter QUADRICYCLE handling and may cause loss of control or brake instability. Always follow these precautions when hauling cargo: Never exceed the stated load capacity for this QUADRICYCLE.
  • Page 30 SAFETY Your EGIMOTORS QUADRICYCLE has been designed to carry a specific capacity. Reduce speed and allow a greater distance for braking when carrying cargo. Loads should be centered and carried as low as possible in the box. For stability on rough or hilly terrain, reduce both speed and cargo.

  • Page 31: Hot Exhaust Systems

    SAFETY HOT EXHAUST SYSTEMS WARNING Exhaust system components are very hot during and after use of the QUADRICYCLE. Hot components can cause burns and fire. Do not touch hot exhaust system components. Always keep combustible materials away from the exhaust system. Use caution when traveling through tall grass, especially dry grass.

  • Page 32: Safety Labels And Locations

    QUADRICYCLE, always read and follow the instructions of the labels on the QUADRICYCLE. If any label becomes illegible or comes off, contact your EGIMOTORS dealer to purchase a replacement. Replacement safety labels are provided by EGIMOTORS at no charge. The part number is printed on the label.

  • Page 33: General Alert

    SAFETY GENERAL ALERT Always read the owner’s manual. Never allow anyone under 18 years of age to operate this QUADRICYCLE. Never use alcohol or drugs before or while driving or riding. This QUADRICYCLE is not approved for on-road operation. GENERAL ALERT (7183307) •...

  • Page 34: Clutch Cover Alert

    CLUTCH COVER ALERT (7181427) Read your owner’s manual. Keep body parts away from belt. INTAKE ALERT (7185975) Use a EGIMOTORS approved air filter. The use of a non-EGIMOTORS approved air filter may cause engine damage. Before installing filter ensure there is no dirt or debris in the clean side of the intake tube.
  • Page 35 SAFETY HOT LIQUID WARNING (7300767) The Hot Liquid Warning label is located on the radiator. Hot liquids and steam may cause severe injury or burns. Allow the QUADRICYCLE to cool before attempting to remove the radiator cap. Part number: 7300767 OWNER’S MANUAL ALERT (7185807) Read the owner’s manual.

  • Page 36: Features And Controls

    FEATURES AND CONTROLS FEATURES AND CONTROLS COMPONENT LOCATIONS ① Cargo Box ② ROPS Frame ③ Fuel Tank Cap ④ Radiators ⑤ Cab Doors ⑥ Mirrors ⑦ Steering Wheel ⑧Tie-Downs (4 corners) ⑨ Throttle ⑩ Pedal Brake ⑪ Gear Selector ⑫ Passenger Hand Hold...

  • Page 37: Auxiliary Outlets

    FEATURES AND CONTROLS SWITCHES ① Hazard Switch ④ Ignition Switch ② AWD Switch ⑤ 12V Accessory Outlet ③ Instrument Cluster AUXILIARY OUTLETS The QUADRICYCLE is equipped with one or more 12-volt accessory outlets. One outlet is on the dash, a second outlet (if equipped) is in the rear passenger area.

  • Page 38: Ignition Switch / Light Switch

    FEATURES AND CONTROLS IGNITION SWITCH / LIGHT SWITCH The ignition switch is a four-position, key-operated switch. Use the ignition switch to start the engine and to turn the lights on or off. The key can be removed from the switch when it is in the OFF position.

  • Page 39: Turn Signal Lever

    FEATURES AND CONTROLS TURN SIGNAL LEVER Before turning, activate a turn signal to alert others of your intentions. Check turn signal lamps before each ride. The key must be in the ON position to activate the turn signals. Move the turn signal lever downward ①...

  • Page 40: All-Wheel Drive (Awd) System

    FEATURES AND CONTROLS ALL WHEEL DRIVE (AWD) SYSTEM The All Wheel Drive system is controlled by the AWD switch. The switch has three positions, AWD (4x4), 2WD (2x4) and Turf Mode (1x4). When in AWD, the demand drive unit will automatically engage any time the rear wheels lose traction.

  • Page 41: Engaging Awd

    FEATURES AND CONTROLS ENGAGING AWD The AWD switch may be turned on or off while the QUADRICYCLE is moving. Initially, the QUADRICYCLE's electronic system will not enable the AWD until the engine RPM is below 3100. Once enabled, the AWD remains enabled until the AWD switch is turned off.

  • Page 42: Electronic Power Steering (Eps)

    EPS has shut down. If the light remains on after starting the engine, the EPS system is inoperative. See your EGIMOTORS dealer, or another qualified person, as soon as possible for repair. Continued operation could result in permanent damage to the EPS unit and increased steering effort.

  • Page 43: Seat Adjustments

    FEATURES AND CONTROLS SEATS Before operating the QUADRICYCLE, always push down on all seat backs to ensure the latches are secure. SEAT ADJUSTMENTS On seats equipped with an adjustment lever under the front edge of the seat, pull the lever to the left. Slide the seat forward or rearward to the desired position.

  • Page 44: Passenger Hand Hold

    FEATURES AND CONTROLS PASSENGER HAND HOLD Always adjust the hand hold to a comfortable position for your passenger before operating. Make sure the adjustment pin and retainer are securely installed after making adjustments. ① ② 1. Remove the retainer from the end of the adjustment pin 2.

  • Page 45: Service Access Panels

    FEATURES AND CONTROLS FUEL CAP The fuel tank filler cap ① is located on the right-hand side of the QUADRICYCLE near the passenger seat. To close, tighten the fuel cap until it clicks twice. When refueling, always use unleaded gasoline with a minimum pump octane number of 91 RON.

  • Page 46: Cab Doors

    EGIMOTORS dealer or qualified person. SEAT BELTS This EGIMOTORS QUADRICYCLE is equipped with seat belts for all riders. Always make sure the seat belts are secured for the operator and all passengers before riding. The driver’s seat belt is equipped with a seat belt interlock.

  • Page 47: Seat Belt Inspection

    If any damage is found, or if the seat belt does not operate properly, have the seat belt system checked and/or replaced by an authorized EGIMOTORS dealer or other authorized person. 4. To clean dirt or debris from the seat belts, sponge the straps with mild soap and water.

  • Page 48: Gear Selector

    ① to the desired gear. Do not attempt to shift gears with engine speed above idle or while the QUADRICYCLE is moving. Maintaining shift linkage adjustment is important to assure proper transmission function. Your EGIMOTORS dealer or qualified person can assist in resolving any shifting problems. NOTICE Do not attempt to shift the transmission while the QUADRICYCLE is moving or damage to the transmission could result.

  • Page 49: Brake Pedal

    FEATURES AND CONTROLS BRAKE AND THROTTLE PEDALS BRAKE PEDAL Depress the brake pedal ① to slow or stop the QUADRICYCLE. Apply the brakes while starting the engine. THROTTLE PEDAL Push the throttle pedal ② down to increase engine speed. Spring pressure returns the pedal to the rest position when released.

  • Page 50: Rollover Protective Structure (Rops)

    The Rollover Protective Structure (ROPS) on this QUADRICYCLE meets OECD Code 4 rollover performance requirements. Always have your authorized EGIMOTORS dealer thoroughly inspect the ROPS if it ever becomes damaged in any way. No device can assure occupant protection in the event of a rollover. When used with seat belts and cab nets or doors, the ROPS helps prevent occupants from being ejected from the QUADRICYCLE.
  • Page 51 FEATURES AND CONTROLS HITCHES WARNING Whenever the QUADRICYCLE is towing, always stay clear of the area between the QUADRICYCLE and the towed object. Failure to do so may result in serious injury or death. REAR HITCH WARNING Strictly follow the instructions outlined in the operator’s manual of the mounted or trailed machinery or trailer, and not to operate the combination QUADRICYCLE —...
  • Page 52 FEATURES AND CONTROLS HITCH REMOVAL / INSTALLATION ① ② 1. To remove the hitch (if equipped), remove the cotter pin and hitch pin ① Remove the hitch, then reinstall the hitch pin and secure the cotter pin ① 2. To install the hitch, remove the cotter pin from the hitch pin and remove ②...

  • Page 53: Instrument Cluster

    FEATURES AND CONTROLS INSTRUMENT CLUSTER NOTICE High water pressure may damage components. Wash the QUADRICYCLE by hand or with a garden hose using mild soap. Certain products, including insect repellents and chemicals, will damage the speedometer lens and other plastic surfaces. Do not use alcohol to clean the instrument cluster. Do not allow insect sprays to contact the lens.

  • Page 54: Indicator Lamps

    ON position. If the light remains on, the EPS system is inoperative. See your EPS Warning EGIMOTORS dealer, or other qualified (if equipped) person, as soon as possible for repair. Continued operation could result in permanent damage to the EPS unit and increased steering effort.
  • Page 55 FEATURES AND CONTROLS LAMP INDICATES CONDITION If this lamp illuminates while the engine is running, promptly contact an authorized dealer or another qualified person who can assist with diagnosis. If abnormal engine operation is Check Engine detected the light will remain on as long as the fault condition exists.
  • Page 56 FEATURES AND CONTROLS LAMP INDICATES CONDITION PASS (PIN Activated The security indicator lamp illuminates when Security the security system is enabled. System, if equipped) Cruise Control Before using the cruise control, read the Engaged (if safety and operation procedures. equipped) Performance Limited (if Not applicable.

  • Page 57: Rider Information Center

    A flashing wrench symbol alerts the operator that the ③ Indicator preset service interval has been reached. Your EGIMOTORS dealer can provide scheduled maintenance. See resetting instructions. Fuel Gauge The segments of the fuel gauge show the level of fuel in ④...
  • Page 58 FEATURES AND CONTROLS MODE INFORMATION DISPLAYS The rider information center contains three areas that display mode information. Description ① Area 1 Modes Engine Temperature Temperature of engine coolant QUADRICYCLE Speed Speed of QUADRICYCLE Tachometer Engine speed (RPM) Description ② Area 2 Modes Odometer The odometer records and displays the distance traveled by the QUADRICYCLE.

  • Page 59: Backlight Color

    FEATURES AND CONTROLS ACCESSING MENUS AND OPTIONS GAUGE SETTINGS MENU Press and release the MODE button to cycle through the Area 1 modes until the desired default mode displays. See the Mode Information Displays section for details. Press and hold the MODE button to enter the settings menu. The OPTIONS screen will display for a few seconds.
  • Page 60 FEATURES AND CONTROLS BACKLIGHT BRIGHTNESS 1. Press and hold the MODE button to enter the settings menu. 2. Press either toggle button to cycle to the “BL LEVEL” option. Press MODE to select. 3. Press “UP” button to increase brightness. Press “DOWN” button to decrease brightness.

  • Page 61: Trip Meter

    FEATURES AND CONTROLS DISPLAY UNITS (STANDARD/METRIC) 1. Press and hold the MODE button to enter the settings menu. 2. Press either toggle button to cycle to the desired “UNITS” option (distance, temperature or volume). Press MODE to select. 3. Press either toggle button to cycle to the desired setting. 4.
  • Page 62 FEATURES AND CONTROLS PROGRAMMABLE SERVICE INTERVAL The service interval counter is programmed to 25 hours at the factory. As hours of engine operation increase, the counter decreases. The wrench icon will flash for about 10 seconds when the counter reaches zero (0), and each time the key is turned on thereafter, until the counter is reset.
  • Page 63 3. If a PIN has already been set, enter PIN. If not, you will be prompted to enter a new one. NOTICE If PIN is lost or displaced please contact your EGIMOTORS dealer for assistance. 4. To enter PIN, follow these steps: Reference the image shown above: ①...
  • Page 64 FEATURES AND CONTROLS 5. To require a PIN for your QUADRICYCLE to start, select “REQUIRE PIN TO START” from the Advanced Menu using the following steps: Reference the image shown above: ① Press the MODE button. ② Toggle the Up/Down buttons to view “ON” or “OFF”. ③...

  • Page 65: Engine Error Codes

    FEATURES AND CONTROLS ENGINE ERROR CODES The error screen displays only when the CHECK ENGINE indicator is on or when it goes on and off during one ignition cycle. Error codes are not stored. When the key is turned OFF, the code and message is lost, but will reappear if the fault reoccurs after restarting the engine.

  • Page 66: 7" Display By Ride Command (If Equipped)

    7" DISPLAY BY RIDE COMMAND (IF EQUIPPED) 7" DISPLAY BY RIDE COMMAND (IF EQUIPPED) BEFORE YOU RIDE Before riding with your new display, do the following: • Read this section and the Ride Command User Guide in their entirety. • Familiarize yourself with the features and operations of the display while the QUADRICYCLE is stationary.
  • Page 67 7" DISPLAY BY RIDE COMMAND (IF EQUIPPED) DEVICE OPERATING REQUIREMENTS Phone functionality is dependent on the capabilities of your cell phone. NOTICE Some cell phones or operating systems will not work as shown in this manual. OVERVIEW ① Ride Command Buttons ⑤...
  • Page 68 7" DISPLAY BY RIDE COMMAND (IF EQUIPPED) RIDE COMMAND BUTTONS BUTTON DESCRIPTION FUNCTION Menu Button Press the Menu button to access the settings. To reboot the display, press and hold for 5 seconds. Gauge Screen Press the Gauge Screen button to select Button from available screens.
  • Page 69 7" DISPLAY BY RIDE COMMAND (IF EQUIPPED) BUTTON DESCRIPTION FUNCTION Volume Decrease Press the Volume Decrease button to Button decrease the volume. Press and hold to mute volume. Volume Increase Press the Volume Increase button to Button increase the volume.

  • Page 70: Indicator Description

    7" DISPLAY BY RIDE COMMAND (IF EQUIPPED) DRIVELINE MODE INDICATOR DESCRIPTION FUNCTION When the switch is on 2X4, the QUADRICYCLE is in two-wheel drive at all times. When in All-Wheel Drive, the demand drive unit will automatically engage any time the rear wheels lose traction. When the rear wheels regain traction, the demand drive unit will automatically disengage.

  • Page 71: Gauge Screens

    7" DISPLAY BY RIDE COMMAND (IF EQUIPPED) GAUGE SCREENS Press the Gauge Screen button to toggle between gauge screens. The display comes loaded with two different gauge screens. Additional gauge screens can be added or deleted. Each gauge screen is customizable and can be set up in the following configurations: •...

  • Page 72: Display Mode

    7" DISPLAY BY RIDE COMMAND (IF EQUIPPED) GAUGE VIEW MODE Press ① to toggle between the two available gauge view modes, Analog and Digital. While in the digital gauge view mode, press ② to invert the MPH and RPM units. DISPLAY MODE From the Control tab , select the display mode from the available options...
  • Page 73 7" DISPLAY BY RIDE COMMAND (IF EQUIPPED) ICON BAR ICON DESCRIPTION FUNCTION ① Headset Displays icon if headset is connected ② Signal Strength Displays current cell signal strength ③ Wireless Internet Displays current wireless internet signal Signal Strength (if strength (if equipped) equipped) ④...
  • Page 74 7" DISPLAY BY RIDE COMMAND (IF EQUIPPED) PIN ACTIVATED SECURITY SYSTEM (P.A.S.S.) (IF EQUIPPED) — RIDE COMMAND The optional PIN Activated Security System (P.A.S.S.) is to prevent unauthorized use. When enabled, the QUADRICYCLE cannot be operated until a valid passcode has been entered using the Ride Command display screen.

  • Page 75: Update Software

    7" DISPLAY BY RIDE COMMAND (IF EQUIPPED) UPDATE SOFTWARE NOTICE Before updating the display, always export your existing rides and waypoints to a USB drive to avoid losing them. To update the software, do the following: DOWNLOAD SOFTWARE ONTO YOUR PERSONAL COMPUTER 1.

  • Page 76: Update Maps

    USB HARDWARE SOFTWARE UPDATES For software update, EGIMOTORS recommends using a SanDisk® or similar USB flash drive with a minimum of 1GB or larger in available memory, formatted using the exFAT® file system. For best results remove all files from the flash drive before starting the update process.

  • Page 77: Operation

    OPERATION OPERATION QUADRICYCLE BREAK-IN ENGINE AND DRIVETRAIN BREAK-IN 1. Fill the fuel tank with the recommended fuel. See the Refueling section for details. Always exercise extreme caution whenever handling fuel. 2. Check the oil level. See the Oil Check section for details. Add the recommended oil as needed to maintain the oil level in the safe operating range.

  • Page 78: Pvt Break-In (Clutches / Belt)

    OPERATION IMPORTANT Do not stop aggressively and do not slow to a complete stop during the burnishing process. After brake burnishing is complete, drive the QUADRICYCLE to cool the brake pads and rotors. NOTICE The burnishing process may cause there to be brake dust on the wheels and calipers.

  • Page 79: Starting The Engine

    OPERATION OPERATING GUIDELINES STARTING THE ENGINE NOTICE Operating the QUADRICYCLE immediately after starting could cause engine damage. Allow the engine to warm up for several minutes before operating the QUADRICYCLE. 1. Position the QUADRICYCLE on a level surface outdoors or in a well- ventilated area.

  • Page 80: Driving In Reverse

    OPERATION DRIVING IN REVERSE WARNING Before shifting into reverse, use extra care to make sure the area is clear of people or obstacles. When it’s safe to proceed, back slowly. Follow these precautions when operating in reverse: 1. Always check for obstacles or people behind the QUADRICYCLE. 2.
  • Page 81 OPERATION FUEL WARNING Gasoline and gasoline vapor is highly flammable and explosive. Refuel outdoors or in a well ventilated area free of any source of flame or sparks, including pilot lights from water heaters, furnaces, or clothes dryers. To avoid fires and explosions, follow these precautions when refueling.
  • Page 82 OPERATION WARNING Gasoline can expand while inside the tank. To avoid fires and explosions, do not overfill the tank. Allow room for gasoline to expand inside the tank by leaving the tank neck empty. NOTICE When refueling, always use unleaded gasoline with a minimum pump number of 91 RON.

  • Page 83: Emission Control Systems

    Do not modify the engine, intake or exhaust components, as doing so may affect compliance with governmental noise level requirements. SPARK ARRESTER Your EGIMOTORS QUADRICYCLE has a spark arrester that was designed for on-road and off-road operation. It is required that this spark arrester remain installed and functional when the QUADRICYCLE is operated.

  • Page 84: Maintenance

    MAINTENANCE MAINTENANCE ELEVATING THE QUADRICYCLE FOR SERVICE Some service procedures require that the QUADRICYCLE be elevated. Before proceeding, remember to: • Always position the QUADRICYCLE on a firm, level surface before elevating. • Only use an appropriate sized lift or jack. •...

  • Page 85: Periodic Maintenance Chart

    Any qualified repair shop or person may maintain, replace or repair the emission control devices or systems on your QUADRICYCLE. An authorized EGIMOTORS dealer can perform any service that may be necessary for your QUADRICYCLE. EGIMOTORS also recommends EGIMOTORS parts for emissions-related service, however equivalent parts can be used.
  • Page 86 The items outlined in this service interval only need to be performed at the first 25 hours of operation. They do not need to be performed every 25 hours. * It is recommended to have an authorized EGIMOTORS dealer perform these services.
  • Page 87 Inspect hoses for damage. Replace as necessary. Locate all applicable fittings and grease. General Lubrication Inspect; adjust pressure level as necessary; Tires inspect wear and replace as necessary. * It is recommended to have an authorized EGIMOTORS dealer perform these services.
  • Page 88 MAINTENANCE QUADRICYCLEs subjected to severe use must be serviced at 50% of the stated interval. Examples of Severe Use: Frequent immersion in mud, water, or sand, constant high RPM use, prolonged low-speed heavy load operation, extended idle, short trip cold weather operation, and prolonged high speed operation. EVERY 100 HOURS / 1600 KM OR 12 MONTHS FOLLOWING INITIAL BREAK-IN SERVICE Engine Oil and Filter...
  • Page 89 Inspect; adjust pressure level as necessary; Tires inspect wear and replace as necessary. * It is recommended to have an authorized EGIMOTORS dealer perform these services. QUADRICYCLEs subjected to severe use must be serviced at 50% of the stated interval. Examples of Severe Use: Frequent immersion in mud, water, or sand, constant high RPM use, prolonged low-speed heavy load operation, extended idle, short trip cold weather operation, and prolonged high speed operation.

  • Page 90: Lubrication Recommendations

    MAINTENANCE LUBRICATION RECOMMENDATIONS Check and lubricate all components at the intervals outlined in the Periodic Maintenance Chart section, or more often under severe use, such as wet or dusty conditions. Items not listed in the chart should be lubricated at the general lubrication interval.
  • Page 91 MAINTENANCE ① Middle Prop Shaft Grease Fitting ② Rear Prop Shaft Grease Fitting ③ Rear Stabilizer Bar Grease Fitting ④ Front Stabilizer Bar Grease Fitting...

  • Page 92: Engine Oil

    MAINTENANCE ENGINE OIL OIL RECOMMENDATIONS WARNING QUADRICYCLE operation with insufficient, deteriorated, or contaminated engine oil will cause accelerated wear and may result in engine seizure, accident, and injury. Always perform the maintenance procedures as outlined in the Periodic Maintenance Chart. Ambient Temperature Range Recommended Oil (-37 °C) to (+38 °C)
  • Page 93 MAINTENANCE ② 3. Remove the dipstick located at passenger-side rear wheel well. Wipe it dry with a clean cloth. 4. Reinstall the dipstick completely. Remove the dipstick and check the oil level. 5. Remove the engine access panel located in the cargo box. ②...

  • Page 94: Oil And Filter Change

    MAINTENANCE OIL AND FILTER CHANGE Always change the oil and filter at the intervals outlined in the Periodic Maintenance Chart section. Always change the oil filter ① whenever changing oil. Access the oil check dipstick and oil filter through the engine access panel located behind the seats.
  • Page 95 MAINTENANCE 9. Reinstall the crankcase drain plug. Torque to 16 N·m. 10. Remove the oil fill cap and add 2.4 L of recommended oil (listed in the Oil Recommendations section). Reinstall the fill cap. 11. Start the engine and check for leaks. 12.

  • Page 96: Transmission (Main Gearcase)

    MAINTENANCE TRANSMISSION (MAIN GEARCASE) Always check and change the fluid at the intervals outlined in the Periodic Maintenance Chart section. Refer to the Gearcase Specifications Chart section for recommended lubricants, capacities and torque specifications. FLUID CHECK The fill plug ① is located on the rear of the gearcase. Maintain the fluid level so that it is even with the bottom thread of the fill plug hole.

  • Page 97: Fluid Change

    MAINTENANCE FLUID CHANGE The drain plug ① is located on the bottom of the gearcase. Access the drain plug through the drain hole in the skid plate. 1. Position the QUADRICYCLE on a level surface. 2. Remove the fill plug with 8mm Allen wrench. 3.
  • Page 98 MAINTENANCE DEMAND DRIVE UNIT (FRONT GEARCASE) Always check and change the fluid at the intervals outlined in the Periodic Maintenance Chart. Refer to the Gearcase Specifications Chart section for recommended lubricants, capacities and torque specifications. DEMAND DRIVE FLUID CHECK The fill plug ① is located on the bottom right side of the demand drive unit. Maintain the fluid level so that it is even with the bottom thread of the fill plug hole.

  • Page 99: Gearcase Specification Chart

    MAINTENANCE DEMAND DRIVE FLUID CHANGE The demand drive drain plug ① is located on the bottom of the gearcase. 1. Position the QUADRICYCLE on a level surface. 2. Place a drain pan under the drain plug. 3. Remove the drain plug. Allow the fluid to drain completely. 4.

  • Page 100: Spark Plug Gap / Torque

    0.7 - 0.8 mm NOTICE Using non-recommended spark plugs can result in serious engine damage. Always use EGIMOTORS-recommended spark plugs or their equivalent. Refer to the Specifications section for details. Spark plug condition is indicative of engine operation. The spark plug firing end condition should be read after the engine is warmed up and the QUADRICYCLE is driven at higher speeds.

  • Page 101: Spark Plug Condition

    MAINTENANCE 2. Clean the area around the spark plugs before removing the plugs. 3. Remove the spark plug caps. 4. Using the spark plug wrench provided in the tool kit, remove the plugs by rotating them counterclockwise. 5. Reverse the procedure for spark plug installation. Torque to specification. SPARK PLUG CONDITION NORMAL PLUG The normal insulator tip is gray, tan or light brown.
  • Page 102 MAINTENANCE FUSE / RELAY CENTER If the engine stops or will not start, if the power steering stops working (if equipped), or if you experience other electrical failures, a fuse may need replacement. Locate and correct any short circuits that may have caused the blown fuse, then replace the fuse.
  • Page 103 MAINTENANCE LABEL VALUE FUNCTION FLASHER 10A Fuse Flasher TRACTOR 10A Fuse Horn, Turn Light Signal, EPS Wake-up, Start Solenoid, AWD Switch, Front Position Light, Accent Light TRAILER 10A Fuse Trailer Position Light, Trailer Brake Light...

  • Page 104: Cooling System

    ADDING OR CHANGING COOLANT EGIMOTORS recommends the use of Antifreeze 50/50 Premix. This antifreeze is already premixed and ready to use. Do not dilute with water. See the Products section for the part numbers.
  • Page 105 MAINTENANCE RADIATOR COOLANT LEVEL / CHANGING COOLANT This procedure is required only if the cooling system has been drained for maintenance and/or repair. If the overflow bottle ③ has run dry, the level in the radiator should also be inspected. CAUTION Escaping steam can cause burns.

  • Page 106: Overflow Bottle Coolant Level

    5. Reinstall the cap. If coolant must be added often, or if the overflow bottle runs completely dry, there may be a leak in the system. Have the cooling system inspected by your EGIMOTORS dealer or authorized person.
  • Page 107 • See your dealer or other qualified service person as recommended in the owner’s manual and on safety labels. • This PVT system is intended for use on EGIMOTORS products only. Do not install it in any other product. • Always make sure the PVT housing is securely in place during operation.
  • Page 108 MAINTENANCE If a belt fails, always clean any debris from the duct and from the clutch and engine compartments when replacing the belt. 1. Allow hot components to cool before performing this procedure. 2. Remove the engine access cover and thoroughly clean all debris from the ①...

  • Page 109: Pvt Drying

    6. Allow the engine RPM to settle to idle speed. Apply the brakes. Shift the transmission to the lowest available range. 7. Test for belt slippage. If the belt slips, repeat the process. 8. Your QUADRICYCLE requires service as soon as possible. Your EGIMOTORS dealer or authorized person can assist.

  • Page 110: Filter Systems

    MAINTENANCE FILTER SYSTEMS INTAKE PRE-FILTERS (IF EQUIPPED) Inspect the engine pre-filter before each use of the QUADRICYCLE to ensure adequate air flow. If necessary, remove the pre-filter and clean with soapy water. Dry with low pressure compressed air. Periodically inspect the clutch (PVT) air intake for debris and clean as needed to ensure adequate air flow.
  • Page 111 7. Reinstall the air filter (if clean) or install a new air filter (if soiled). Do not attempt to clean the air filter. NOTICE Use of a non-EGIMOTORS-approved air filter may cause engine damage. Always use a EGIMOTORS-approved replacement filter. Please see your EGIMOTORS dealer or authorized person.

  • Page 112: Spark Arrester

    MAINTENANCE SPARK ARRESTER WARNING Failure to heed the following warnings while servicing the spark arrester could result in serious injury or death. Do not perform clean-out immediately after the engine has been run, as the exhaust system becomes very hot. Serious burns could result from contact with the exhaust components.
  • Page 113 MAINTENANCE BRAKES WARNING Operating the QUADRICYCLE with a spongy brake pedal can result in loss of braking, which could cause an accident resulting in severe injury or death. Never operate the QUADRICYCLE with a spongy-feeling brake pedal. The front and rear brakes are hydraulic disc type brakes activated by the brake pedal.

  • Page 114: Brake Inspection

    MAINTENANCE BRAKE INSPECTION WARNING Do not apply WD-40® or any petroleum product to brake discs. These types of products are flammable and may also reduce the friction between the brake pad and caliper. 1. Check the brake system for fluid leaks.

  • Page 115: Brake Fluid

    MAINTENANCE BRAKE FLUID WARNING After opening a bottle of brake fluid, always discard any unused portion. Never store or use a partial bottle. Brake fluid is hygroscopic, meaning it rapidly absorbs moisture from the air. The moisture causes the boiling temperature of the brake fluid to drop, which can lead to early brake fade and the possibility of accident or severe injury.

  • Page 116: Suspension Settings

    MAINTENANCE SUSPENSION SETTINGS WALKER EVANS RACING SHOCKS (IF EQUIPPED) The factory setting is appropriate for nearly all riding conditions. If desired, the suspension may be adjusted to maintain QUADRICYCLE clearance height when carrying loads. To adjust the preload, do the following: 1.
  • Page 117 MAINTENANCE WALKER EVANS RACING SHOCK COMPRESSION ADJUSTMENT (IF EQUIPPED) The compression damping clicker knob is located at the top of the shock reservoir. 1. Turn the clicker clockwise to increase compression damping. 2. Turn the clicker counter-clockwise to decrease compression damping. FACTORY PRELOAD SETTINGS Setting Compression Damping...
  • Page 118 • Never operate the QUADRICYCLE on the highest or second highest preload settings without a total combined payload in the QUADRICYCLE of 204 kg or more. Payload includes the driver, passenger, EGIMOTORS- approved accessories and cargo. Never exceed the stated load capacity for the QUADRICYCLE.
  • Page 119 MAINTENANCE FOX® SHOCKS (IF EQUIPPED) Spring Preload Adjustment The factory setting is appropriate for nearly all riding conditions. If desired, the suspension may be adjusted to maintain ground clearance when carrying additional weight. To adjust the preload, do the following: 1.
  • Page 120 Full clockwise position (0 clicks) WARNING Uneven adjustment may cause poor handling of the QUADRICYCLE, which could result in an accident. Always adjust both the left and right spring preloads equally or have your EGIMOTORS dealer/authorized person perform the adjustments.

  • Page 121: Tire Tread Depth

    QUADRICYCLE handling, which could result in QUADRICYCLE damage or personal injury. Always maintain proper tire pressure. Always use EGIMOTORS- approved size and type of tires for this QUADRICYCLE when replacing tires. Tires age even if they have not been used or have only been used occasionally.

  • Page 122: Axle And Wheel Nut Torque Specifications

    MAINTENANCE AXLE AND WHEEL NUT TORQUE SPECIFICATIONS Inspect the following items occasionally for tightness, and if they've been loosened for maintenance service. Do not lubricate the stud or the lug nut. Lug Nut (Aluminum Front and Rear 162.7 N⋅m Wheels) Hub Retaining Nut Front and Rear 245 N⋅m...

  • Page 123: Wheel Installation

    Always ensure that all nuts are torqued to specification. Do not service axle nuts that have a cotter pin installed. See your EGIMOTORS dealer or authorized person. Right rear wheel shown (type varies by model).

  • Page 124: Headlight Replacement

    MAINTENANCE LIGHTS Headlight and taillight lenses become dirty during normal operation. Clean all lights frequently to ensure a clear field of vision as well as visibility to other QUADRICYCLEs. LED LAMPS If an LED headlamp appears to have moisture or fogging inside the lens, disconnect the wiring harness from the headlamp(s) for a few days to allow the moisture to clear out.

  • Page 125: Headlight Beam Adjustment

    MAINTENANCE HEADLIGHT BEAM ADJUSTMENT The headlight beam can be adjusted slightly upward or downward and to the left or right. NOTICE Rider weight must be included on the seat while performing this procedure. 1. Ensure the tire pressure of all tires is at the recommended levels. 2.
  • Page 126 MAINTENANCE 6. Include the weight of a rider on the seat while performing this step. Observe the headlight aim. As a starting point, the most intense part of the headlight beam should be 5 cm below the mark on the wall. Adjust to operator preference.

  • Page 127: Steering Wheel Inspection

    2. Lightly turn the steering wheel left and right. 3. There should be 20-25 mm of freeplay. 4. If there is excessive freeplay or strange noises, or if the steering feels rough or “catchy,” have the steering system inspected by an authorized EGIMOTORS dealer or other qualified personnel.

  • Page 128: Battery Removal

    If you do not drive the QUADRICYCLE for more than TWO WEEKS, EGIMOTORS recommends using a BatteryMINDer® 2012 AGM - 2 AMP charger (PN 2415548), which can be ordered through your dealer.
  • Page 129 MAINTENANCE EGIMOTORS provides a charging accessory ① with your QUADRICYCLE that allows easy connection to the battery through the 12V auxiliary outlet ② , located on the dash. During charging, place the charger outside of the QUADRICYCLE and protect it from moisture.

  • Page 130: Battery Installation

    Battery trickle chargers will automatically charge the battery if voltage drops below a pre-determined point. See the EGIMOTORS products section for the part numbers. During the storage period, park the QUADRICYCLE out of the sun in a cool, dry...

  • Page 131: Cleaning And Storage

    Certain products, including insect repellents and chemicals, will damage plastic surfaces. Do not allow these types of products to contact the QUADRICYCLE. The best way to clean your EGIMOTORS QUADRICYCLE is with a garden hose and a pail of mild soap and water.
  • Page 132 MAINTENANCE If a high pressure water system is used for cleaning (not recommended) exercise extreme caution. The water may damage components and could remove paint and labels. Avoid directing the water stream at the following items: • Wheel bearings • Electrical components and wiring •...

  • Page 133: Storage Tips

    MAINTENANCE POLISHING THE QUADRICYCLE EGIMOTORS recommends the use of common household aerosol furniture polish for polishing the finish on your EGIMOTORS QUADRICYCLE. Follow the instructions on the container. POLISHING TIPS • Avoid the use of automotive products, some of which can scratch the finish of your QUADRICYCLE.

  • Page 134: Inspect And Lubricate

    6. If EGIMOTORS fuel system additive is not used, fuel tank, fuel lines, and injectors should be completely drained of gasoline. 7. Reinstall the spark plug caps to the spark plugs.

  • Page 135: Storage Area / Covers

    STORAGE AREA / COVERS Be sure the storage area is well ventilated. Cover the QUADRICYCLE with a genuine EGIMOTORS cover. Do not use plastic or coated materials. They do not allow enough ventilation to prevent condensation, and may promote corrosion and oxidation.

  • Page 136: Specifications

    SPECIFICATIONS SPECIFICATIONS RZR S 1000 1050 kg Gross QUADRICYCLE Weight Capacity (includes weight of operator, passenger, cargo, accessories) Unladen mass in running order 580kg Rear Cargo Box Capacity 136 kg 80kg Rear Hitch Tongue Capacity 290kg/290kg Maximum Braked/Unbraked Trailer Mass Fuel Capacity 36 l Engine Oil Capacity...
  • Page 137 Rear Suspension Independent double a-arm with 33.5 cm of travel Lubrication System Wet Sump Driving System Type Automatic EGIMOTORS Variable Transmission EPS: Lockable Differential Shift Type Dual Range P/R/N/L/H Tires / Tire Pressure - Front 27x9-12 / 1Bar Tires / Tire Pressure - Rear...
  • Page 138 SPECIFICATIONS OUTPUT GEAR RATIOS OUTPUT GEAR RATIOS Rear High Gear 10.73 Low Gear 18.77 Reverse 20.41 Front (including front drive) Non-EPS High Gear 13.71 11.88 Low Gear 23.94 20.74 Reverse 26.07 22.59 Drive Ratio - Front 3.82 3.31 CLUTCHING Please see your authorized dealer for clutching specifications CARBON DIOXIDE EMISSIONS CO2 Emissions: 1011 g/kWh* *This CO2 measurement results from testing over a fixed test cycle under...

  • Page 139: Lubricants / Service Products

    PRODUCTS PRODUCTS LUBRICANTS / SERVICE PRODUCTS PART NUMBER DESCRIPTION Engine Lubricant Fogging Oil — 355 mL Aerosol 2870791 PS-4 Full Synthetic 5W-50 4-Cycle Oil — 0.95 L 2876244 PS-4 Full Synthetic 5W-50 4-Cycle Oil — 3.8 L 2876245 PS-4 Extreme Duty Synthetic 0W-50 4-Cycle Oil — 0.95 L 2889395 PS-4 Extreme Duty Synthetic 0W-50 4-Cycle Oil —...
  • Page 140 PRODUCTS PART NUMBER DESCRIPTION U-Joint Grease — 89 mL Cartridge 2871515 U-Joint Grease — 414 mL Cartridge 2871551 Dielectric Grease (Nyogel®) 2871329 Additives / Miscellaneous 2871326 Carbon Clean 2870652 Fuel Stabilizer 2872189 DOT 4 Brake Fluid Loctite® 565 Thread Sealant 2871956 2830438 Battery Trickle Charger...

  • Page 141: Troubleshooting

    PVT information. Inspect clutch seals for damage if repeated leaking system occurs. See your EGIMOTORS dealer or other qualified person Clutch malfunction Check for clogged air filter, clogged fuel filter, water in the fuel or Poor engine performance foreign material in fuel tank or fuel lines.
  • Page 142 TROUBLESHOOTING ENGINE DOESN’T TURN OVER POSSIBLE CAUSE SOLUTION Low battery voltage Recharge the battery to 12.8 VDC Loose battery connections Check all connections and tighten Loose solenoid connections Check all connections and tighten Loose electronic control box Inspect, clean, reinstall connectors connections Mechanical failure See your dealer...

  • Page 143: Engine Turns Over, Fails To Start

    TROUBLESHOOTING ENGINE TURNS OVER, FAILS TO START POSSIBLE CAUSE SOLUTION Out of fuel Refuel Clogged fuel filter See your dealer Water is present in fuel Drain the fuel system and refuel Old or non-recommended fuel Replace with fresh recommended fuel Fouled or defective spark plugs Inspect plugs and replace if necessary...

  • Page 144: Engine Backfires

    TROUBLESHOOTING ENGINE BACKFIRES POSSIBLE CAUSE SOLUTION Out of fuel Refuel Weak spark from spark plug Inspect, clean and/or replace spark plugs Incorrect spark plug gap or heat Set gap to specs or replace plugs range Old or non-recommended fuel Replace with fresh recommended fuel Incorrectly installed spark plug wires See your dealer...

  • Page 145: Engine Runs Irregularly, Stalls, Or Misfires

    SOLUTION Fouled or defective spark plugs Inspect, clean and/or replace spark plugs Worn or defective spark plug wires Your EGIMOTORS dealer or qualified person can assist Incorrect spark plug gap or heat Set gap to specs or replace plugs range...

  • Page 146: Engine Stops Or Loses Power

    TROUBLESHOOTING ENGINE STOPS OR LOSES POWER POSSIBLE CAUSE SOLUTION Out of fuel Refuel Inspect and replace Kinked or plugged fuel tank vent line or filter Water is present in fuel Replace with new fuel Fouled or defective spark plugs Inspect, clean and/or replace spark plug Worn or defective spark plug wires See your dealer...

  • Page 147: Limited Warranty

    WARRANTY WARRANTY LIMITED WARRANTY EGIMOTORS gives a TWO YEAR LIMITED WARRANTY on all components of your Quadricycle against defects in material or workmanship. This warranty covers parts and labor charges for repair or replacement of defective parts and begins on the date of purchase by the original retail purchaser.

  • Page 148: Warranty Coverage And Exclusions

    WARRANTY COVERAGE AND EXCLUSIONS LIMITATIONS OF WARRANTIES AND REMEDIES This EGIMOTORS limited warranty excludes any failures that are not caused by a defect in material or workmanship. THIS WARRANTY DOES NOT COVER CLAIMS OF DEFECTIVE DESIGN. This warranty also does not cover acts of God, accidental damage, normal wear and tear, abuse or improper handling.

  • Page 149: Lubricants And Fluids

    HOW TO OBTAIN WARRANTY SERVICE You are responsible for presenting your QUADRICYCLE to an authorized EGIMOTORS dealer as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time. When requesting warranty service you must present your copy of the Warranty Registration Form to the dealer.
  • Page 150 QUADRICYCLE. If you purchase from a private party: If you purchase a EGIMOTORS product from a private party, to be kept and used outside of the country in which the product was originally purchased, all warranty coverage will be denied. However, we encourage you to promptly register your product at your local authorized EGIMOTORS dealer to receive safety information and notice regarding your product.

  • Page 151: Exported Products

    IS SOLD OUTSIDE THE COUNTRY OF THE SELLING DEALER'S AUTHORIZED LOCATION. This policy does not apply to products that have received authorization for export from EGIMOTORS. Dealers may not give authorization for export. You should consult an authorized dealer to determine this product's warranty or service coverage if you have any questions.

  • Page 152: Maintenance Log

    MAINTANACE LOG MAINTENANCE LOG MAINTENANCE LOG Use the following chart to record periodic maintenance. DATE MILES (KM) TECHNICIAN SERVICE PERFORMED / OR HOURS COMMENTS...
  • Page 153 MAINTENANCE LOG...
  • Page 154 For more information visit www.Egimotors.it Egimotors Via Filippo da Desio 49/51 20832 Desio (MB) ITALY info@polarisitalia.com...

Table of Contents