Advertisement
Quick Links
Lussi Thin Round Semi Inset Basin 380mm
Pre-Installation Check
Please unwrap the basin and check it carefully to ensure it has not been damaged in handling
or transport.
Basin must be installed to the requirements of AS/NZS 3500 by a qualified plumber
If using wall mounted tapware, please take into consideration the length of the outlet to the position
of the Basin on the Benchtop.
If the Tapware is to be bench mounted, allow suitable bench top width for fitting the tapware.
Waste Assembly
1. Fit the supplied (40mm) solid surface overflow pop up waste
plug to basin.
Kado - Lussi Thin Round Semi Inset Basin 380mm (No Taphole)
(No Taphole)
Page 01
of 03
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Reece KADO Lussi 1805781
Summary of Contents for Reece KADO Lussi 1805781
- Page 1 Lussi Thin Round Semi Inset Basin 380mm (No Taphole) Pre-Installation Check Please unwrap the basin and check it carefully to ensure it has not been damaged in handling or transport. Basin must be installed to the requirements of AS/NZS 3500 by a qualified plumber If using wall mounted tapware, please take into consideration the length of the outlet to the position of the Basin on the Benchtop.
- Page 2 Lussi Thin Round Semi Inset Basin 380mm (No Taphole) Installation 2. Cut out marked section on supplied Template. Position supplied cut out Template onto the bench top and mark off. Cut hole in bench top to Template size. Kado - Lussi Thin Round Semi Inset Basin 380mm (No Taphole) Page 02 of 03...
- Page 3 Lussi Thin Round Semi Inset Basin 380mm (No Taphole) Apply waterproof sealant (not supplied) to the rim of the basin and to the bench top. Note: Use non-acetic neutral cure sealant. Fit basin onto the bench top and press firmly all around to achieve good seal.
Need help?
Do you have a question about the KADO Lussi 1805781 and is the answer not in the manual?
Questions and answers