Drift single rail shower with wall water inlet (5 star) (2 pages)
Summary of Contents for Reece mizu Drift 9511864
Page 1
Mizu Drift Dual Function Sensor Basin Mixer Chrome Mains Operated (6 Star) Basin Mixer x1 Battery Pack x1 Solenoid x1 Power Supply x1 Tools Required Wrench Installation Instructions This product must be installed to the requirements of AS/NZS 3500 by a qualified plumber. Page 01 of 03...
Page 2
Installation Ÿ Ensure installation area is free from dust and debris. Typical Installation Ÿ Minimum hole size is 32mm diameter, with a maximum depth of 35mm. Ÿ Make sure pipework is properly flushed and free of any obstructions which could affect operation. Ÿ...
Page 3
The HOT/COLD mixer handle operates as normal. It does not control Ÿ the temperature of the auto water line. Ÿ The auto water line temperature is controlled through the installation. Either cold or warm water can be provided. Refer to Installation Instructions.
Need help?
Do you have a question about the mizu Drift 9511864 and is the answer not in the manual?
Questions and answers