Reece KADO Lussi Wall Hung Vanity Installation Instructions

Please take time to read and perform these checks before proceeding to the installation instructions.
This product must be installed by a qualified trades person in a professional manner.
All Kado Lussi cabinet drawers are fitted and adjusted before being distributed. It is the responsibility of the installer to make
any necessary adjustments to door/drawers after installation.
Caution: When lifting or installing heavy items always seek assistance, never attempt to lift or maneuver alone. Always
follow safe practices and use personal protective equipment (PPE).
1.
Inspect all items upon delivery.
If you believe there is a fault , damage, or the item is incorrect, contact the place of purchase immediately and do not
proceed with installation. Proceeding with installation will immediately void warranty. The manufacturer will not be liable
for installation or removal costs.
We allow 7 days from receipt of goods for notification of any discrepancies in goods received.
Once installed, no claims of damage will be accepted.
2.
Ensure you have the appropriate equipment
You will need:
- Spirit Level
- Power Drill
- Bathroom Silicone
- Fixings
The installer is to determine and supply appropriate fixings for installation location, substrate and other environmental factors.
3.
Read the specification documents of your basin and check for special plumbing or mounting
requirements
Basin installation requirements vary between brand, manufacturer and style.
4. Test fit your basin onto vanity
5.
Determine mounting position
Cabinets should be positioned at least 300mm from the closest wet area.
The materials used in the production of our cabinets are moisture resistant not water proof, excessive exposure to moisture
will cause damage.
Cabinets should not be mounted in a corner or flush between two walls.
Always check for potential interferences between cabinet drawer and other fixtures and fittings such as doors, windows,
switches, hardware, furniture etc.
Check that your wall is flat, level and square
6.
The wall you are mounting to must be flat level and square from floor to ceiling (vertically), and left to right (horizontally).
If necessary use packers to level cabinet and prevent twisting. If cabinet becomes twisted drawer alignment and function
maybe affected.
7.
Make sure you have appropriate support
Your wall should have appropriate support beams (studs/noggins) to mount your cabinet to. Supports should run the entire
length of the cabinet and be positioned according to the mounting information supplied in this document.
8.
Test fit all plumbing components
Test fit all plumbing components from basin to waste point at wall and check for any interferences with internal cabinet
components before continuing.
FAILURE TO ADHERE TO THE ABOVE PREPARATION OR INSTALLATION INSTRUCTIONS
Plumbers, please ensure a copy of the installation
instructions is left with the end user for future reference
Lussi Wall Hung Vanity
Pre-Installation Checks
WILL VOID YOUR WARRANTY
1 of 5
Installation Instructions