Summary of Contents for Better Homes and Gardens 1482096WCOM
Page 1
1482096WCOM (White) 1482196WCOM (Natural) Leighton 3 Drawer Dresser B341482XXXWCOM00GO Date of Purchase ___ / ___ / ___ Lot Number: Scan for Product information & Assembly Instruction THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Call us! 1-800-489-3351 Visit ameriwoodhome.com Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 2 Open your item in the area you plan to keep it to avoid excessive heavy lifting. - Identify, sort and count the parts before attempting assembly.
Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight.
Page 4
Before You Start Please Note: You may need to lightly tap the wood dowels with a hammer into the holes during your assembly process. Wood Dowel Insertion: Insert wood dowel completely into the hole. Not Actual Size Wood dowel will extend out approximately 3/8".
Board Identification Not Actual Size Top Panel Bottom Panel Left Panel 1 PC 1 PC 1 PC Right Panel Upper Back Panel Lower Back Panel 1 PC 1 PC 1 PC Support Rail Drawer Support 1 PC 4 PCS 3 PCS Drawer Bottom Small Drawer Side Right Small Drawer Side left...
Page 6
Board Identification Not Actual Size Small Drawer Back Small Drawer Partition Small Drawer Front 1 PC 1 PC 1 PC Large Drawer Side Right Large Drawer Side Left Large Drawer Back 2 PCS 2 PCS 2 PCS For any replacement part, see page 8.
Page 7
Board Identification Not Actual Size Small Drawer Large Drawer ameriwoodhome.com Tube...
Each part has a unique part number. Please refer to the appropriate part number when contacting customer service for replacement parts. Before throwing any packaging, please verify all contents and make sure you have received all the parts listed on the previous pages. 1482096WCOM 1482196WCOM QUANTITY: LABEL...
Page 9
Part List Actual Size For any replacement hardware, see page 10. (x22) (x33) (x19) Cam Bolt Wood Dowel Screw Ø6x25 mm Ø6x30 mm Ø4x38 mm (x1) (x4) (x7) (x1) Screw Screw Screw Bolt Ø4.2x13 mm Ø4x45 mm Ø4.2x28 mm 1/4"x32 mm Not Actual Size (x11) (x22)
Page 10
Each part has a unique part number. Please refer to the appropriate part number when contacting customer service for replacement parts. Before throwing any packaging, please verify all contents and make sure you have received all the parts listed on the previous pages. 1482096WCOM 1482196WCOM MODEL# (White)
Page 11
STEP (x11) Attach Upper Back Panel (E) to Lower Back Panel (F) with 3 Wood Dowels (2) as illustrated. Insert 4 Wood Dowels (2) into Upper Back Panel (E) and insert 4 Wood Dowels (2) into Lower Back Panel (F) as illustrated. The hole for Cam Lock faces upward...
Page 12
STEP Dowels extend out 3/8". For more details, please see page 4 (x4) (x8) Attach 4 Cam Bolts (1) to Left Panel (C), Right Panel (D) as illustrated. Do NOT over-tighten. Insert 8 Wood Dowels (2) into Left Panel (C), Right Panel (D) as illustrated. Unfinished Edge Unfinished...
Page 13
STEP Arrow to point towards end hole in edge of part End hole (x2) Attach Right Panel (D) to boards (E) and (F) as shown. Insert two Cam Locks (9) into boards (E) and (F) as shown below. Turn Cam Locks (9) clockwise to lock panels in place. Rounded The holes for edge...
Page 14
STEP Arrow to point towards end hole in edge of part End hole (x2) Attach Left Panel (C) to boards (E) and (F) as shown. Insert two Cam Locks (9) into boards (E) and (F) as shown below. Turn Cam Locks (9) clockwise to lock panels in place. The holes for Rounded Cam Locks...
Page 15
STEP (x4) (x1) (x1) Attach 4 Cam Bolts (1) to Top Panel (A) as illustrated. Do NOT over-tighten. Attach Wall Bracket (11) to Top Panel (A) using Screw (5) as illustrated. Do NOT fully tighten Screw (5) at this step. Rounded edge ameriwoodhome.com...
Page 16
STEP Dowels extend out 3/8". For (x3) more details, please see page 4 (x2) Insert 2 Wood Dowels (2) into Support Rail (G) as illustrated. Attach Support Rail (G) to Top Panel (A) with 3 Screws (3) as illustrated. Surface with Wood Dowels Surface with Wood Dowels...
Page 17
STEP Arrow to point towards end hole in edge of part End hole (x4) Attach Top Panel (A) to boards (C) and (D) as shown. Insert four Cam Locks (9) into boards (C) and (D) as shown below. Turn Cam Locks (9) clockwise to lock panels in place. Rounded edge Pro Tip: If you are having trouble connecting your Cam Bolts and Cam Locks, check to make sure your Cam Locks are in the...
Page 18
STEP Dowels extend out 3/8". For more details, please see (x4) page 4 Insert four Wood Dowels (2) into four Legs (H) as illustrated. ameriwoodhome.com Tube...
Page 19
STEP (x4) (x4) (x1) (x4) Attach four Legs (H) to Bottom Panel (B) with four Bolts (7),four Spring Washers (12) and four Flat Washers (13) as illustrated. Flip over ameriwoodhome.com Tube...
Page 20
STEP (x7) Attach Bottom Panel (B) to boards (C), (D) and (F) with 7 Screws (4) as illustrated. Rounded edge ameriwoodhome.com Tube...
Page 21
STEP For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. (x1) (x1) THESE INSTRUCTIONS TO INSTALL THE ANTI‐TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT. WARNING Hole Serious or fatal crushing injuries can Stud occur from furniture tipover.
Page 22
STEP Dowels extend out 3/8". For more details, please see page 4 (x4) (x10) Attach ten Cam Bolts (1) into Large Drawer Fronts (S) as illustrated. Do NOT over-tighten. Insert two Wood Dowels (2) into Large Drawer Side Lefts (Q) and two Wood Dowels (2) into Large Drawer Side Rights (P) as illustrated.
Page 23
STEP (x8) Attach Large Drawer Side Left (Q) and Large Drawer Side Right (P) to Large Drawer Back (R) with four Screws (3) x 2 as illustrated. Unfinished Edge Unfinished Edge ameriwoodhome.com Tube...
Page 24
STEP Slide Drawer Bottom (J) into the grooves of the large drawer panels (Q), (P) and (R) x 2 as illustrated. Unfinished Surface Unfinished Surface ameriwoodhome.com Tube...
Page 25
STEP (x2) Attach Drawer Support (I) to Large Drawer Back (R) with Screw (3) x 2 as illustrated. ameriwoodhome.com Tube...
Page 26
STEP Arrow to point towards end hole in edge of part End hole (x10) Attach Large Drawer Front (S) to boards (P), (Q) and (I) as shown. Insert five Cam Locks (9) into boards (Q), (P) and (I) as shown below. Turn Cam Locks (9) clockwise to lock panels in place.Repeat for the second Large Drawer (S).
Page 27
STEP Dowels extend out 3/8". For more details, please see page 4 (x4) (x4) Attach four Cam Bolts (1) into Small Drawer Front (O) as illustrated. Do NOT over-tighten. Insert 4 Wood Dowels (2) into Small Drawer Side Left (L), Small Drawer Side Right (K) and Small Drawer Partition (N) as illustrated.
Page 28
STEP (x6) Attach boards (K), (L) and (N) to Small Drawer Back (M) with five Screws (3) as illustrated. Insert Drawer Bottom (J) to the grooves of the boards (L), (M) and (K) as illustrated. Attach Drawer Support (I) to Small Drawer Back (M) with 1 Screw (3) as illustrated. Unfinished Edge Unfinished...
Page 29
STEP Arrow to point towards end hole in edge of part End hole (x4) Attach Small Drawer Front (O) to (I), (L), (K) and (N) as shown. Insert four Cam Locks (9) into boards (L), (N), (K) and (I) as shown below. Turn Cam Locks (9) clockwise to lock panels in place. Pro Tip: If you are having trouble connecting your Cam Bolts and Cam Locks, check to make sure your Cams Locks are in the open position with the arrow pointing out towards the Small Drawer Front (O).
Page 30
STEP (x11) Attach 11 Cam Covers (8) to boards Left, Right and Partition of the small drawer and large drawer as shown. ameriwoodhome.com Tube...
Page 31
STEP Insert a Small Drawer and two large drawers into the Unit. Make sure the Small Drawer (O) is on the top. Note: To prevent serious injuries, please refer to the Warning Label on the sides of the drawers. Left Side Right Side Note: Bellow steps are only used to remove the drawer when needed.
Page 32
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. Warning: Risk of serious injury to person - do not place a television on this furniture. This furniture is not approved for use with a television.
Page 33
Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Quick and easy replacement part service To register your product, visit ameriwoodhome.com Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You"...
Page 34
Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-800-489-3351 (Gratis) Visitar: www.ameriwoodhome.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte.
Page 35
Español Página 5, 6 & 7: Identificación de la Junta Página 9: Lista de No es la talla actual Tamaño real (A) PANEL SUPERIOR Perno de leva (B) PANEL INFERIOR Espiga de madera (C) PANEL IZQUIERDO Tornillo Tornillo (D) PANEL DERECHO Tornillo (E) PANEL POSTERIOR SUPERIOR (F) PANEL POSTERIOR INFERIOR...
Page 36
Español Página 16 Inserte 2 espigas de madera (2) en el riel de soporte (G) como se ilustra. Fije el riel de soporte (G) al panel superior (A) con 3 tornillos (3) como se ilustra. Página 17 Fije el panel superior (A) a los paneles (C) y (D) como se muestra. Inserte cuatro cerraduras de leva (9) en los paneles (C) y (D) como se indica a continuación.
Page 37
Español Página 24 Deslice el fondo del cajón (J) en las ranuras de los paneles grandes del cajón (Q), (P) y (R) x 2 como se ilustra. Página 25 Fije el soporte del cajón (I) a la parte trasera del cajón grande (R) con el tornillo (3) x 2 como se ilustra. Página 26 Fije el frente del cajón grande (S) a los paneles (P), (Q) e (I) como se muestra.
Page 38
Español Nota: Los siguientes pasos solo se utilizan para quitar el cajón cuando sea necesario. Tire del cajón hacia atrás hasta que las palancas sean visibles. Empuje la palanca del lado izquierdo hacia arriba y la palanca del lado derecho hacia abajo. Mantenga las palancas en su lugar y tire del cajón hacia usted.
Page 39
Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez-nous: 1-800-489-3351 (sans frais) - Visitez: www.ameriwoodhome.com ATTENTION Le meuble peut basculer et causer des blessures graves ou la mort.
Need help?
Do you have a question about the 1482096WCOM and is the answer not in the manual?
Questions and answers