F-SECURE INTERNET GATEKEEPER FOR LINUX 4.01 Administrator's Manual page 81

－HTTP
200
－SMTP
50
－POP
50
－FTP
10
If you increase the maximum number of connections, more connections are allowed, but it
requires more memory. Approximately 500 KB of memory is used for each connection.
Message
###ERROR### notify_admin:gethostbyname error:admin_mx_host=[Host name] hstrerror=[Error
details]
Description
The SMTP server ("admin_mx_host" in /opt/f-secure/fsigk/conf/fsigk.ini), which is configured to
send notifications to the administrator after a virus or spam detection, could not be retrieved.
Solution
Check if the configured host name of the SMTP server can be retrieved.
Message
###ERROR### notify_admin:cannot connect to admin mail server[Host name:Port number] /
strerror(xxx)=xxx
Description
Connection to the SMTP server ("admin_mx_host", "admin_mx_port" in
/opt/f-secure/fsigk/conf/fsigk.ini), which is configured to send notifications to the administrator after
a virus or spam detection, was successful. However, an error occurred.
Solution
Check if the host name and port number of the configured SMTP server can be accessed.
Message
###ERROR### notify_admin:smtp error:[Send command name]: buf=[Response line]
/strerror(xxx)=xxx
Description
The response message using SMTP for sending notifications to the administrator after a virus or
spam detection returned an error.
The send command indicates the SMTP connection status. It can be either "HELO/MAIL
FROM/RCPT TO/DATA/QUIT" (when each command is sent), "GREETING" (when the connection
is started) or "DATA END" (when data has been sent).
Solution
Check the [Response line] if mail can be sent to the configured SMTP server.
F-Secure Internet Gatekeeper for Linux/Administrator's Guide
81