Command-Line Tools; Auto-Start - F-SECURE INTERNET GATEKEEPER FOR LINUX 4.01 Administrator's Manual

You do not need to use command-line operations daily. Please refer to this chapter if command-line
operations are required.
The proxy function of Internet Gatekeeper is automatically started when changes are made to its
settings in the Web Console, or during system start-up via /etc/rc.d/init.d/. In such cases, the
proxy auto-start command (rc.fsigk_{http,smtp,pop,ftp}) should be started first. The
auto-start command initializes the proxy execution command (fsigk).

8.1 Auto-Start

Overview of operations:
Starts, stops, and restarts the proxy execution command (fsigk), Web Console, and virus
verification daemon (fsavd) when the computer is started with the auto-start command (initscript).
Launch the virus verification engine before you start each proxy service.
Command names:
/opt/f-secure/fsigk/rc.fsigk_http http proxy auto-start command
/opt/f-secure/fsigk/rc.fsigk_smtp smtp proxy auto-start command
/opt/f-secure/fsigk/rc.fsigk_pop
/opt/f-secure/fsigk/rc.fsigk_ftp
/opt/f-secure/fsigk/rc.fsigk_fsavd Virus verification engine
/opt/f-secure/fsigk/rc.fsigk_admin Web Console auto-start command
Options:
Starts the proxy
start
Stops the proxy
stop
Restarts the proxy
restart
Displays the status of the proxy
status
Command examples:
Restart the http proxy
# /opt/f-secure/fsigk/rc.fsigk_http restart
Configure the http proxy to auto-start
# ln -s /opt/f-secure/fsigk/rc.fsigk_http /etc/init.d/fsigk_http
# chkconfig --add fsigk_http
# chkconfig fsigk_http on
F-Secure Internet Gatekeeper for Linux/Administrator's Guide

8. Command-line Tools

pop proxy auto-start command
ftp proxy auto-start command
70